1/10 R/C F1's...Pics, Discussions, Whatever...
#6076
Tech Champion
iTrader: (30)
I have to say the F1 class was fun at IIC - the tires didn't feel ideal and honestly, they are the only ones I have used on a current model F1 car but it was still fun. Time on track was limited like any big race, but it was the same for the TC and 1/12 cars as well. The cost was not that bad considering what you got - 2-3 meals, free beer at the meet and greet sponsor party, set of tires and rims, goody bag with lots of different quality things. Finally the experience of being at the race (in Vegas) and meeting and talking to other drivers from around the world.
They don't run F1 at my local track, I bought it just for this race and experience to do it. Glad I did -- my have finished 10, but I made the show and had a good time. PS - thanks to Brad for the support of the race and the tire decals, totally finished off the look of the car!!
http://www.rc50.com/modules.php?name...bum=72&pos=586
They don't run F1 at my local track, I bought it just for this race and experience to do it. Glad I did -- my have finished 10, but I made the show and had a good time. PS - thanks to Brad for the support of the race and the tire decals, totally finished off the look of the car!!
http://www.rc50.com/modules.php?name...bum=72&pos=586
#6078
Tech Elite
iTrader: (11)
Thanks. After I shipped the F103 out to you, I was digging in the "archives" for a bunch of 1/8 Tamiya stuff I posted over the weekend on fee-bay and found an F103 body set I picked up from D-Drive awhile back and painted and detailed in the old Leyton House March livery. I ran the body once and then went to the body I painted up that was shipped to you with the chassis. Will take some pics and post up later.
Panda
Panda
#6082
Tech Champion
iTrader: (22)
You can use different o rings or even neoprene foam like for shock bladders for a different feel. Also a metal washer in place of the forward oring is helpful if you want to reduce flex. I have even used an .030 nylon washer like used on offroad cars inplace of o rings on carpet.
#6085
Tech Addict
iTrader: (65)
Wanted to share my new McLaren Mercedes - a Unimog car carrier: [Tamiya CC-01]
Actual car carrier currently awaiting completion of fabrication.
Also, due to LewHam leaving McLaren for MercedesGP - the F104X1 livery has been updated to reflect car #1. (It started as the Heikki #2 ride)
Actual car carrier currently awaiting completion of fabrication.
Also, due to LewHam leaving McLaren for MercedesGP - the F104X1 livery has been updated to reflect car #1. (It started as the Heikki #2 ride)
Last edited by macavant; 10-09-2012 at 09:46 PM.
#6087
I've been running my f104 pro at our local track on practice days, as there's no class for it currently. I've seen many pics of the exotek f1r chassis for this, and I do like the design/layout for it, as I have a rc12 5.1 pan car and am familiar with the whole tweak/spring/damper setup. Can anyone else give me a review or better idea of what this chassis is about? Good/bad? Also, anyone use the hi capacity lipo conversion kit for these cars?
#6089
Tech Elite
iTrader: (70)
Already set my esc and receiver and battery in the F103 just to see what it looked like