2667Likes1/10 R/C F1's...Pics, Discussions, Whatever...
08-22-2017, 05:20 PM
Are you gluing the insert to the tire or the wheel?
08-22-2017, 06:02 PM
I don't glue it to either. I simply glue the insert ends together, with 3M 77 spray adhesive on the insert ends, wait 5-10 minutes and attach them. Then I stuff the insert into the tire, and install on the rim. Glue the tire to the rim.
I've tried a variety of adhesives to glue the inserts together and the 3M 77 spray adhesive, applied sparingly, doesn't leave a hard joint 'bump' where the ends join together. Other methods/glues such as CA leave a hard joint. Which you can feel through the tire.
Hope this helps,
Mark
I've tried a variety of adhesives to glue the inserts together and the 3M 77 spray adhesive, applied sparingly, doesn't leave a hard joint 'bump' where the ends join together. Other methods/glues such as CA leave a hard joint. Which you can feel through the tire.
Hope this helps,
Mark
08-22-2017, 06:08 PM
Tech Initiate
Hi Guys
Recently got a f1 and was wondering what ride height and what gearing do you use on this bad boy
thamks
Recently got a f1 and was wondering what ride height and what gearing do you use on this bad boy
thamks
08-22-2017, 06:09 PM
Ride height of 3mm-5mm, depending on how bumpy. Gear ratio of 3.0 for 21.5 or numerically lower for 25.5.
08-22-2017, 06:18 PM
Tech Initiate
Hi Nutdriver
I am using 25.5,what gearing do you recommend?I am new so i don't know much about the gearing on the f1 cars
thanks
I am using 25.5,what gearing do you recommend?I am new so i don't know much about the gearing on the f1 cars
thanks
08-22-2017, 07:11 PM
I am sorry I posted the pic. I see the body differently apparently than everyone else. Of course I have it in front of me and not just a phone pic of one angle. I see old designs, new designs and honestly I see an F1 body, albeit a mixture of about 3 decades of F1. If you all know me I am more interested in the late 80s and early 90s bodies. I see some of that in this one. I also see some of the present lines. Sorry
08-23-2017, 01:35 AM
Hello F1 Lovers
In Fenix we've a new front wing available.
Made from sturdy ABS plastic and coming in black or white colour the wings also include additional flaps to fine-tune the aerodynamics. The wings can be run without the high nose support with the white one being dyeable using fabric dye.
In Fenix we've a new front wing available.
Made from sturdy ABS plastic and coming in black or white colour the wings also include additional flaps to fine-tune the aerodynamics. The wings can be run without the high nose support with the white one being dyeable using fabric dye.
08-23-2017, 03:25 AM
Hello F1 Lovers
In Fenix we've a new front wing available.
Made from sturdy ABS plastic and coming in black or white colour the wings also include additional flaps to fine-tune the aerodynamics. The wings can be run without the high nose support with the white one being dyeable using fabric dye.
In Fenix we've a new front wing available.
Made from sturdy ABS plastic and coming in black or white colour the wings also include additional flaps to fine-tune the aerodynamics. The wings can be run without the high nose support with the white one being dyeable using fabric dye.
08-23-2017, 05:40 AM
Brooksy,
Maybe 2.7 or 2.8 for tighter tracks, 2.5 for longer and faster tracks.
Maybe 2.7 or 2.8 for tighter tracks, 2.5 for longer and faster tracks.
08-23-2017, 05:48 AM
08-23-2017, 07:00 AM
My new YOKOMO
YOKOMO YR-10 Formula
08-23-2017, 09:10 AM
I don't glue it to either. I simply glue the insert ends together, with 3M 77 spray adhesive on the insert ends, wait 5-10 minutes and attach them. Then I stuff the insert into the tire, and install on the rim. Glue the tire to the rim.
I've tried a variety of adhesives to glue the inserts together and the 3M 77 spray adhesive, applied sparingly, doesn't leave a hard joint 'bump' where the ends join together. Other methods/glues such as CA leave a hard joint. Which you can feel through the tire.
Hope this helps,
Mark
I've tried a variety of adhesives to glue the inserts together and the 3M 77 spray adhesive, applied sparingly, doesn't leave a hard joint 'bump' where the ends join together. Other methods/glues such as CA leave a hard joint. Which you can feel through the tire.
Hope this helps,
Mark
08-23-2017, 04:42 PM
Yeah that Elmer's works awesome!
08-25-2017, 01:17 PM
08-25-2017, 06:05 PM
Tech Rookie
Tamiya f60 body
Last edited by Romanfu; 08-25-2017 at 06:40 PM.
