Team Associated TC6 Thread
#8779
#8781
Tech Rookie
In sure this question has been asked, what are the ball park springs for high bite carpet, as well as the cam holders? I have the stock ae springs, and using cam a at 6 in the front and cam a 13 in the back
#8782
Tech Fanatic
iTrader: (1)
zeppin 1.8mm for more grip overall in any case.
with that topdeck (front 4x screws, rear end only 4 screws, no screw on shaft blocks) it drive very easy and nice.
I have tested normal std top deck with removed materials like yokomo or now zeppin and it was also better.
STD topdeck only for very big grip track, but then I will also put zeppin topdeck and only add two screws on shaft blocks and play with other setup things.
Whish you the best!
m.
with that topdeck (front 4x screws, rear end only 4 screws, no screw on shaft blocks) it drive very easy and nice.
I have tested normal std top deck with removed materials like yokomo or now zeppin and it was also better.
STD topdeck only for very big grip track, but then I will also put zeppin topdeck and only add two screws on shaft blocks and play with other setup things.
Whish you the best!
m.
#8783
Tech Master
iTrader: (21)
I am having a really tough time getting these shocks set right. I have the RSD shock bladders and Orings in them and just rebuilt them and they all have a squeeky sound them like their is air in the shocks. Is anyone else having the same problem? I have been trying different techniques and nothing seems to work.
#8785
Tech Elite
iTrader: (28)
I am having a really tough time getting these shocks set right. I have the RSD shock bladders and Orings in them and just rebuilt them and they all have a squeeky sound them like their is air in the shocks. Is anyone else having the same problem? I have been trying different techniques and nothing seems to work.
#8786
I may have one soon. Where are you located? PM me the details.
#8787
Tech Fanatic
iTrader: (6)
Hey guys, just got a TC6 in a trade, will be running it for VTA. Can anyone tell me what the differences are between it and the TC6.1? Ill be reading up and doing my research, but I have a few questions. I didn't get any of the adjustment parts, but did get a LOT of spares.
I noticed the toe and wheelbase is adjusted using spacers. My car currently has some plastic pieces for this, anyone got any recommendations for some aluminum blue ones? I have some red ones from my photon I can use until I get some blue ones that match.
Are there different battery mounting pieces to eliminate the battery from moving sideways? There is currently about 4mm gap where the battery can move left to right.
What are the recommended mods for this chassis? Every chassis has the mods that people figure out.
Again, ill be doing my research on this chassis, just figured someone might be nice enough to give me a heads up early ( this is a LONG thread). I just got it home, so I've got a lot of reading to do Thanks for any heads ups!
I noticed the toe and wheelbase is adjusted using spacers. My car currently has some plastic pieces for this, anyone got any recommendations for some aluminum blue ones? I have some red ones from my photon I can use until I get some blue ones that match.
Are there different battery mounting pieces to eliminate the battery from moving sideways? There is currently about 4mm gap where the battery can move left to right.
What are the recommended mods for this chassis? Every chassis has the mods that people figure out.
Again, ill be doing my research on this chassis, just figured someone might be nice enough to give me a heads up early ( this is a LONG thread). I just got it home, so I've got a lot of reading to do Thanks for any heads ups!
#8788
Tech Addict
iTrader: (1)
#8789
Tech Regular
iTrader: (2)
I am having a really tough time getting these shocks set right. I have the RSD shock bladders and Orings in them and just rebuilt them and they all have a squeeky sound them like their is air in the shocks. Is anyone else having the same problem? I have been trying different techniques and nothing seems to work.