Team Scream Racing
#1548
The additional 31 for shipping can be sent via PP to his account ([email protected]).
Unfortunately the website isn't user friendly for international shipping yet.
So once the order is placed you'll have to send the additional 31.
#1550
Just a quick update...
Talking with John, the 21.5's and 13.5's are listed in stock and have 0 back orders
The 17.5's... Orders that have come in the last 5 days are being processed now.
All other earlier orders have been shipped!
The 25.5 orders are being taken care of now, there aren't many left!
A huge rush just came through. All 25.5 current orders will be going out today.
The next shipment of motors come in the week on the 22nd.
Talking with John, the 21.5's and 13.5's are listed in stock and have 0 back orders
The 17.5's... Orders that have come in the last 5 days are being processed now.
All other earlier orders have been shipped!
The 25.5 orders are being taken care of now, there aren't many left!
A huge rush just came through. All 25.5 current orders will be going out today.
The next shipment of motors come in the week on the 22nd.
#1557
The black ring on the winds is an insulator for the collector plate.
Make sure nothing got sucked up into the motor.
Sometimes a fine web of solder that shorts out A to B or B to C solder lugs gives it that feel when you remove it from your vehicle, double check that.
If you are familiar with the motor go ahead and pull it apart and make sure everything looks normal (no rub marks on ID of stator or OD of rotor). Also make sure the bearings are free.
#1558
Typical numbers I see on an Igauss are:
3 line 1540 to 1580
4 line 1640 to 1660
I use a 9.5v power supply as a power source.
Which way do you put the rotor in? location of rotor and direction will change the numbers drastically. But you should still have seen a much higher number for a 4 line.