chrisk

iTrader: (32)

thanks Craig, just wanted to check it by my setup and see if there are any differences

cyclone speed

Hello Everyone,

I have a quick question regarding springs. I should be running outdoor very soon and I just want to ''prepare" the car at home because I won't have much time on the day.
My question is : what springs is a good start for outdoor asphalt, medium traction, slightly bumpy track ? Running a 417 with 13.5 motor.
I know the HPI Silver/silver is a very common combo, but I can't find a second Silver set.
I currently own : 2 Tamiya Yellow; 4 Tamiya blue; 2 Tamiya White; 2 HPI Silver; 2 HPI pink and 2 HPI Gold.
What would be a good starting combo Front/Rear in you opinion ?

Thank you very much.

tubkeZ

Its great chassis I have older version trf415msxx its really strong!

CraigM

iTrader: (34)

Silver/silver or ride red/red, both are readily available online. If you 100% have to run with what you've got go for pink/silver or silver/blue

Mate_Nemeth

Does someone have a good outdoor setup for 417?

I've run with 5.5T Boosted but the traction is low..

I use 2-piece suspension blocks in front and rear,cutted-motor mount and top deck.

If someone could help me would be very nice

Thanks,

Mate

maxepower

iTrader: (1)

Go on http://www.thard.co.uk or try Tamiya's TRF website http://teamtrf.com/ it has set-ups for carpet, asphalt, warm weather and cold weather tracks,etc, etc, you just have to consider what tires and inserts you'll be using, that should get you pointed in the right direction!
Just my 2$

CraigM

iTrader: (34)

Viktor's Gran Canaria set up should be a good starting point. Remember hole 3 on the 417X towers is hole 2 on the original 417 towers.

http://wilck.se/setups-trf417x/

TryHard

iTrader: (4)

My 417 is up for sale!

http://www.rctech.net/forum/r-c-item...l#post10643851

Ed

CraigM

iTrader: (34)

That gear diff looks familiar...

TryHard

iTrader: (4)

yeah, might be the one you blew up!! (but now fixed!)

WildManDriving

iTrader: (30)

Tempting if this new job comes through.

CraigM

iTrader: (34)

Hopefully shimmed better this time!

TryHard

iTrader: (4)

It was shimmed fine... your just an animal!!

hana166

iTrader: (2)

I can understand how difficult it is to face going back to doing shocks, retweaking when you only want to change the spur etc

Guillermito

Hello, I wonder whether to put CA on the edges of carbon parts.

Thank you very much. Best Regards.