805LikesTamiya Championship Series
05-03-2017, 11:36 AM
05-03-2017, 11:39 AM
Wait for it....two new TCS Legal Body sets coming May 10! One is a re-release 
Legal for GT-1 only this year. The second is legal for all GT classes.
https://www.tamiyausa.com/items/radi...a-nsx-gt-47353
https://www.tamiyausa.com/items/radi...i-f12tdf-51592
Legal for GT-1 only this year. The second is legal for all GT classes. https://www.tamiyausa.com/items/radi...a-nsx-gt-47353
https://www.tamiyausa.com/items/radi...i-f12tdf-51592
Panda 🐼
05-04-2017, 04:40 AM
TQ racing!
you're funny , unfortunately my skill level is not quite there for F1 but any tips on 17.5 sedan would be greatly appreciated!
Just my 2$
P.S- Fred was at the track this past Saturday and said that it is legal but only for GT-1 so guess what body I'm running at TQ in GT-1- 17.5
05-04-2017, 02:59 PM
Panda
you're funny , unfortunately my skill level is not quite there for F1 but any tips on 17.5 sedan would be greatly appreciated!
Just my 2$
P.S- Fred was at the track this past Saturday and said that it is legal but only for GT-1 so guess what body I'm running at TQ in GT-1- 17.5
you're funny , unfortunately my skill level is not quite there for F1 but any tips on 17.5 sedan would be greatly appreciated!
Just my 2$
P.S- Fred was at the track this past Saturday and said that it is legal but only for GT-1 so guess what body I'm running at TQ in GT-1- 17.5
Tip for 17.5 sedan at TQ....... don't lift !
Panda 🐼
05-05-2017, 03:53 PM
I would be shocked if the FDR was exactly the same. I will know for sure when I arrive in Japan next week. I'm going for the Shizuoka Show, where the car will be shown. I will be meeting with the designer of the car, so I will know for sure what the final specs of the car will be.
Make sure to follow our facebook page for all the show photos and tidbits of the the new car.
Make sure to follow our facebook page for all the show photos and tidbits of the the new car.
Thanks,
Glenn
05-09-2017, 06:58 AM
Theoretically speaking!
I'll be testing your don't lift theory at TQ this Friday. So, who has the record for breaking the most C-hubs at TQ. One weekend I broke 4 but it was on two different cars and one had a 13.5 motor in it, so I hope I don't break my own record this Friday!
Just my 2$
05-09-2017, 07:06 AM
Fredtech
Glenn,
Fred reads this thread a lot so he'll have to let you know on that, but if he did put on a race it probably won't happen until after Reedy on Memorial weekend. Are you doing Reedy this year?
Max
05-10-2017, 12:32 AM
Today I got to see the ALL NEW M-07 Concept and test drive it.
One, this thing does not drive like any Tamiya M-chassis before it. It drives like a touring car. It's precise and it completely has a direct feel. Two, it design is just like the TA-07. It's construction and ease of assembly is very evident. Accessing the diff is simply done by removing the bottom of the gear case with 8 screws. The sway bar attachment is very similar to the TA-07. Once you set it correctly to your liking, the setting won't change when you need to access the diff of the car. The designer is very proud of that tid bit.
Internal drive ratio is 3.1221
You can choose the following pinion 06 module sizes: 17, 18, 19, 20, 21, 22, 23, 24. With a 24 your final drive is 4.813
I have pics, but can't post until the first official day of the show.
Remember, the kits go on sale worldwide on June 25th!
One, this thing does not drive like any Tamiya M-chassis before it. It drives like a touring car. It's precise and it completely has a direct feel. Two, it design is just like the TA-07. It's construction and ease of assembly is very evident. Accessing the diff is simply done by removing the bottom of the gear case with 8 screws. The sway bar attachment is very similar to the TA-07. Once you set it correctly to your liking, the setting won't change when you need to access the diff of the car. The designer is very proud of that tid bit.
Internal drive ratio is 3.1221
You can choose the following pinion 06 module sizes: 17, 18, 19, 20, 21, 22, 23, 24. With a 24 your final drive is 4.813
I have pics, but can't post until the first official day of the show.
Remember, the kits go on sale worldwide on June 25th!
05-12-2017, 06:47 AM
M-07 debut
Fred,
When is the first official day of the show?
Inquiring minds want to know!
When is the first official day of the show?
Inquiring minds want to know!
05-12-2017, 07:30 AM
05-14-2017, 09:19 AM
Hey gang, will we be allowed to use C type tires at TQ in the Pro Spec class? Thanks for your time.
05-15-2017, 12:15 PM
9. Tires: You must use the Tamiya Pre-Mounted B3 tires, item #1015. Note: You must always use the B3 pre-mount tires irrespective of track surface.
05-15-2017, 12:27 PM
Killed the corner speed....just my .02
05-15-2017, 12:28 PM
I think the 2017 rules allow it
05-15-2017, 12:36 PM
