Houstons Engine Service H.E.S.
#5566
Pipes/plug/clutch/fuel/chassis/clutch etc. are all factors
#5574
Tech Apprentice
Joined: Aug 2009
Posts: 66
From: iowa
Called and talked to Monty last night for the first time. Never met the man before but he talked with me like we were old friends. He answered all my questions and didn't try to sell me something I didn't need. Thank's again Monty. Order is in can't wait to start breaking it in.
By the way your watch is 2 min. fast
By the way your watch is 2 min. fast
#5575
monty what is the total head shim thickness on the plus4 c Im putting new ones in,but mine has 2 aluminum only no copper.
I bought this motor new from here.My team version has 2 alu and 1 copper. Thanks
I bought this motor new from here.My team version has 2 alu and 1 copper. Thanks
#5576
R u sure its not stuck between the two aluminum?
If not we will get ya taken care of
.80mm total
#5577
Called and talked to Monty last night for the first time. Never met the man before but he talked with me like we were old friends. He answered all my questions and didn't try to sell me something I didn't need. Thank's again Monty. Order is in can't wait to start breaking it in.
By the way your watch is 2 min. fast
By the way your watch is 2 min. fast


And thanks for the kind words , it means alot
#5579
#5580
Ok guys its time for just allittle feedback..More feedback to come when it hits the track with a race tune.
To start off I have a hott mod p5xs that runs awsome to compare to.
Ok so I bought a p5xlt and sent it to monty for his tune including the +4c crank,17011 bearing,and ceramic rear bearing.
Im at about 1 gallon mark and its realy starting to come alive and at this point already feels faster then my p5sx its alot smoother and realy puts the power to the ground!I run the exact setup with both the engines but the hes p5xlt sounds totaly differant,it just sounds and feels very strong,alot stronger then the hott mod p5xs.I can not wait for this thing to drop its nuts,it will be a total beast with smooth power from bottom to top!
Do not be afraid to get this combo for a buggy because it just feels right at home in one!Very smooth! Thanks Monty
To start off I have a hott mod p5xs that runs awsome to compare to.
Ok so I bought a p5xlt and sent it to monty for his tune including the +4c crank,17011 bearing,and ceramic rear bearing.
Im at about 1 gallon mark and its realy starting to come alive and at this point already feels faster then my p5sx its alot smoother and realy puts the power to the ground!I run the exact setup with both the engines but the hes p5xlt sounds totaly differant,it just sounds and feels very strong,alot stronger then the hott mod p5xs.I can not wait for this thing to drop its nuts,it will be a total beast with smooth power from bottom to top!
Do not be afraid to get this combo for a buggy because it just feels right at home in one!Very smooth! Thanks Monty



22Likes