18LikesXray NT1
05-26-2010 | 06:20 PM
#5311
Tech Master
Joined: Oct 2005
Posts: 1,440
From: 42
I was bored after kicking so much ass during carpet season 
. No, for real I expected the first several races to be rained out and I am busy with work, starting a new business and engineering school. Any one of which is enough of a pain in the ass. RC has taken a back seat to it all. and not that it matters that I haven't shown up, like 2 of the three races got rained out right?
. No, for real I expected the first several races to be rained out and I am busy with work, starting a new business and engineering school. Any one of which is enough of a pain in the ass. RC has taken a back seat to it all. and not that it matters that I haven't shown up, like 2 of the three races got rained out right?
Hope to see you at the track...someday!
05-26-2010 | 06:26 PM
#5312
. I will see if I can sneak off to the track for the next race. I gathered some tires, and fuel so I can run. 
where's everybody at??? lol
05-26-2010 | 10:33 PM
#5315
Tech Regular
Joined: Jul 2003
Posts: 407
From: Washington D.C.
Never satisfied.....
Where you racing at these days???
05-27-2010 | 05:13 AM
#5317
You going to Joliet with Tory in June?
05-27-2010 | 03:14 PM
#5318
Tech Regular
Joined: Jul 2003
Posts: 407
From: Washington D.C.
05-27-2010 | 06:16 PM
#5319
06-01-2010 | 02:18 PM
#5322
Tech Regular
Joined: May 2009
Posts: 483
From: eastern,ct
picked up NTI from my friend. came with every upgraded part imaginable. also came with a skyline vr12 plus pipe and header. any info on this pipe would be helpful. run a JP black mod. + nova 353 plus.12C. thanks
06-01-2010 | 08:22 PM
#5323
Tech Fanatic
Joined: Sep 2006
Posts: 887
From: NY, New York
For anyone looking for more consistent braking using the stock brake pads, here's a cheap easy mod I did to my pads while being bored lol. You just cut material allowing you to use springs that separate the pads from each other after braking. this will reduce the friction created from the disk rubbing on the pads, and your pads will also last longer... 
Pictured are the soft 2speed springs for the NT1, which are the correct length but are just too hard for this operation. the O'donnell brake springs for their ZO1 buggy Is what worked out for me.
Use 2 of the springs on each side, 4 come in the pack.
http://www3.towerhobbies.com/cgi-bin...?&I=LXWZC9&P=7
Pictured are the soft 2speed springs for the NT1, which are the correct length but are just too hard for this operation. the O'donnell brake springs for their ZO1 buggy Is what worked out for me.
Use 2 of the springs on each side, 4 come in the pack.
http://www3.towerhobbies.com/cgi-bin...?&I=LXWZC9&P=7
Last edited by D-nicest; 07-15-2010 at 04:50 AM.
06-01-2010 | 08:27 PM
#5324
Tech Fanatic
Joined: Sep 2006
Posts: 887
From: NY, New York
You'd be better off getting a nova 2652 pipe or 2660... Used the skyline pipe a long time ago when they were still making them. you'd get better performance using one of the newer pipes from Novarossi. It's fine to use for practice though...
