Tamiya TA07 pro
#1997
Tech Elite
iTrader: (51)
I wanted the battery to float to better aid in chassis flex so I used some of the tamiya 1mm foam from my trf102 f1 car....
I used the exo 6 battery hold down set from exotek and some blue washers from ebay and some 2mm shims and some 12mm screws that came with the psm set.
pulley is a 20mm post from ebay and the plastic motor mount from the ta07 and some small bearings.
All in all it looks factory I think which is what I was going for
I used the exo 6 battery hold down set from exotek and some blue washers from ebay and some 2mm shims and some 12mm screws that came with the psm set.
pulley is a 20mm post from ebay and the plastic motor mount from the ta07 and some small bearings.
All in all it looks factory I think which is what I was going for
#2005
Tech Regular
iTrader: (14)
Just want to thank PSM for having great customer service. My order came in today for some parts that I ordered. Along with replacement hardware in blue anodizing. The replacement hardware is for the conversion kit that I bought a few weeks ago. Which came with chrome anodizing. I wasn’t expecting on the replacement hardware. But it sure looks a lot better in blue.
#2006
My Ta07 Pro with RC Lab HK chassis and damper stay, still under construction...
#2007
Big thumbs up for PSM, I've just received some blue alloy hardware from them FOC!