2LikesTekno RC EB48 Thread
05-23-2013 | 06:21 AM
#6647
Tech Addict
Joined: Mar 2011
Posts: 526
From: Wichita,KS.
Hey Tekno crew... I'm sure you did some testing on left right balance with different sized batteries. What size/weight batteries give the best balance?
I'm currently running the Reedy wolfpack 3700 mah. Lrp ix8 with a dynamic 8 motor.
I'm currently running the Reedy wolfpack 3700 mah. Lrp ix8 with a dynamic 8 motor.
05-23-2013 | 08:14 AM
#6650
05-23-2013 | 08:29 AM
#6651
Joined: Feb 2008
Posts: 4,513
From: Belleville, MI
05-23-2013 | 09:08 AM
#6652
Tech Regular
Joined: Dec 2012
Posts: 297
From: Riyadh, Saudi Arabia
those ugly body made by jsconcept that looks like the rc8 new bodies is truely let me hate the look of nay 1/8 scale buggy.
the best body made is the bod of the dex408 and i wish if any after market manufacturer will make a body similar to it for the eb48.
the best body made is the bod of the dex408 and i wish if any after market manufacturer will make a body similar to it for the eb48.
05-23-2013 | 09:26 AM
#6654
05-23-2013 | 09:29 AM
#6655
Tech Master
Joined: Oct 2011
Posts: 1,025
From: The 561
Swaybars
Can someone please explain the effect of swaybars on rear traction? I've gotten the suspension where I like it for the bumps and jumps. Removed antisquat, max rear toe, and rear camber at 1*. Also removed rear brace. Car is more planted than stock. I purchased all of the swaybars and want to tune with them now. Seems the threads I'm reading have opposing info, so I'm asking you guys. Thanks in advance.
05-23-2013 | 09:59 AM
#6656
Tech Adept
Joined: Apr 2009
Posts: 104
From: Joliet IL
The cab forward design is an acquired taste. I had one on my 8ight and it handled low traction tracks better.
05-23-2013 | 10:03 AM
#6657
I'll leave the sway bars for some of these suspension guys, They do a great job at explaining even if they do hate typing 
I like the Finnisher but the Tekno body is slick. Tekno should do an SCT body...
I like the Finnisher but the Tekno body is slick. Tekno should do an SCT body...
05-23-2013 | 10:27 AM
#6658
From what I have seen they use the same description for all of the Finnisher bodies.
I read the blog post and says the body has increased clearance in the servo area. That would be a plus in my book as the stock buddy seems to rub slightly in that area with the nut on top of the arm, even with a shorter screw.
The cab forward design is an acquired taste. I had one on my 8ight and it handled low traction tracks better.
The cab forward design is an acquired taste. I had one on my 8ight and it handled low traction tracks better.
