SC10 4x4 Thread
I've been using blue fronts on the rear the past couple weeks. It still has a slight push, but its manageable now with 5k/3k. There's something else I want to try that will give me more caster, just have to wait for a couple of parts to try it. I may drop to 3k/1k also, since it turns just a little better every time I go thinner. I'm just tired of taking apart the diffs lol
Still building the FT, looking for some shock spring/oil and sway bar suggestions. Also will be running with exotek chassis.
Will be running at TRCR, med bite clay, now huge jumps with some bumpy lanes.
Thanks
Will be running at TRCR, med bite clay, now huge jumps with some bumpy lanes.
Thanks
they are smaller and not very good anyway, you dont want them. On both of my durrangos i have to bring the collars down every week to obtain the same ride height. They tend to get soft (relatively of course) as they compress.
How come some E-tard is'nt on the Losi thread saying stuff like they have no care, their just slow and have no will to win .....
Last edited by Wild Cherry; 03-25-2012 at 10:40 AM.
Ft shock =1.2 piston , no limiters , 32.5W ,2m rebound, unscrew shock eyelet 2 turns
rear shock = 1.2 piston , no limiters, 30w, don't unscrew shock eyelet
use emulsion shock , no bladder's..
Last edited by Wild Cherry; 03-25-2012 at 10:25 AM.
Use Kody's Spektrum set-up posted on www.rc10.com...
Ft shock =1.2 piston , no limiters , 32.5W ,2m rebound, unscrew shock eyelet 2 turns
rear shock = 1.2 piston , no limiters, 30w, don't unscrew shock eyelet
Ft shock =1.2 piston , no limiters , 32.5W ,2m rebound, unscrew shock eyelet 2 turns
rear shock = 1.2 piston , no limiters, 30w, don't unscrew shock eyelet



5Likes
