|
Got a little issue with my Revention R and sensored v3 10.5 motor.
It stutters/cogs on takeoff and it seems to be getting worse. My Revention S/3500kv combos are much smoother,any ideas? |
Originally Posted by 71schaeffer
(Post 13849982)
Were can i get a Reventon Pro programming card?
or http://shop.speedpowerrc.com/revento...-program-card/ |
Originally Posted by ER
(Post 13849877)
Didn't see the SP thread so I started a new thread; sorry SP guys. Here's what I'm looking at. Got a tekno 410 with tekin rx8/4600. Also got a SP pro and 5700kv. Hooked up 5700 to rx8 and tekin Hotwire only allows current limiter adjustments. We played around with the PC interface on a friends 410 running a SP pro/4300 and Mod2 firmware didn't allow boost. It drove OK, but went to Stock1 firmware and it was WAY more speed and torque with boost at 80%. I'm new to the PC interface and:
1. What adjustments can be made running the rx8/5700kv SP motor? 2. What firmware is suggested for tekno 410 and 5700kv? 3. What reventon pro settings would you recommend for a 5700? Thanks and I appreciate you helping a Speed Passion "newbie" |
just bought the reventon R! i bought it because it stated you could ue your ipad and iphone to make adjustments. I have looked everywere for it. I used the link on there website, it takes me to the hong kong market then tells me its not available. I have sent a email to them with no reply anyone know what i can do?
|
Guys i was practicing today with a brand new Reventon Pro esc and 2 mins into my run it went up in smoke bad. I hooked everything up right, it isnt my first time wiring up a car, and i also had multiple people double check for me and everything checked out good. What can i do warrenty wise or to return it to get another and have them check this one out? Im just upset because its brand spanking new
|
Originally Posted by dallasv8
(Post 13850075)
Got a little issue with my Revention R and sensored v3 10.5 motor.
It stutters/cogs on takeoff and it seems to be getting worse. My Revention S/3500kv combos are much smoother,any ideas? 2. Check your sensor wire and or sensor board. If possible replace the sensor board in the motor or use a different motor just to test. 3. What firmware are you using? Stock0, Mod0, etc? Make sure you have the newest version available from Speed Passion's website. You'll need to download the free software to your computer then hook everything up.
Originally Posted by 71schaeffer
(Post 13853478)
Guys i was practicing today with a brand new Reventon Pro esc and 2 mins into my run it went up in smoke bad. I hooked everything up right, it isnt my first time wiring up a car, and i also had multiple people double check for me and everything checked out good. What can i do warrenty wise or to return it to get another and have them check this one out? Im just upset because its brand spanking new
Sorry to see that happen. If you just bought it and it's under warranty you'll need to do the RMA process. Create an account to start and have your receipt handy. (http://www.speedpassion.net/us/loginfirst.asp?a=rma) |
"Sorry to see that happen. If you just bought it and it's under warranty you'll need to do the RMA process. Create an account to start and have your receipt handy. (http://www.speedpassion.net/us/loginfirst.asp?a=rma)[/QUOTE]"
Alright thank you |
Originally Posted by iceman_bigb
(Post 13852965)
just bought the reventon R! i bought it because it stated you could ue your ipad and iphone to make adjustments. I have looked everywere for it. I used the link on there website, it takes me to the hong kong market then tells me its not available. I have sent a email to them with no reply anyone know what i can do?
In order to have any chance of using the app, you would have to buy an older iPad or iPod, or find a way to downgrade your current equipment to run an older version of iOS. That's (only) part of the reason I sold all of my speed passion stuff. |
I have a revention pro and a pro 1.1 ESC. I'm trying to figure out how to run a blinkey mode. I loaded the stock firmware. I was told by the local shop the light on the ESC will continue to blink, the only time mine blinks is when I go on throttle. Any ideas?
|
Originally Posted by JBR18
(Post 13856657)
I have a revention pro and a pro 1.1 ESC. I'm trying to figure out how to run a blinkey mode. I loaded the stock firmware. I was told by the local shop the light on the ESC will continue to blink, the only time mine blinks is when I go on throttle. Any ideas?
Mke sure your TX is calibrated properly. When you are in neutral with no input your ESC should blink. |
Originally Posted by 71schaeffer
(Post 13853478)
Guys i was practicing today with a brand new Reventon Pro esc and 2 mins into my run it went up in smoke bad. I hooked everything up right, it isnt my first time wiring up a car, and i also had multiple people double check for me and everything checked out good. What can i do warrenty wise or to return it to get another and have them check this one out? Im just upset because its brand spanking new
|
Originally Posted by rockhumper
(Post 13857628)
Good luck with the warranty they have had mine for 10+ weeks. No word on anything.:flaming:
|
Tried loading stock 0 but keep getting update fail. Load stock 1 seems OK but no blinking. According to the manual blinking red or orange represents a problem.
|
Originally Posted by JBR18
(Post 13857768)
Tried loading stock 0 but keep getting update fail. Load stock 1 seems OK but no blinking. According to the manual blinking red or orange represents a problem.
Stock0 is zero timing Binky Check to see you have the newest software on your PC. If not delete the current one and install the new one. |
Originally Posted by Nexus
(Post 13857640)
Did you confirm this with the dealer guy you have been working with? Since he was the one who tried to return it all communication would go through him.
|
| All times are GMT -7. It is currently 08:59 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.