R/C Tech Forums - Speed Passion Thread

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Speed Passion Thread (https://www.rctech.net/forum/radio-electronics/490076-speed-passion-thread.html)

http://www.speedpassion.net/reventon/reventonr.asp

check out the bottom of the page

thanks Alan...gonna order an R version today!

Quote:

Originally Posted by Trevor Williams (Post 11402863)

so that LED programmer and my pc at home are all I need to alter esc settings correct? I mainly have ran LRP sxx in the past....sorry for the silly questions.....thanks for the help.

you dont need your pc to adjust esc settings. thats what the program card is for. but to download different software, for ex. switching to blinky mode to regular mode u will need the program card and pc together. both the led and lcd box(lcd is nicer due to the big screen and no reading numbers, but both work the same basically. the RP comes with the nice one) can do this. once u download the software just take your little card with you to make any esc adjustments.

1. download software from SP website
2. hook up card to esc and pc
3. click whatever software u wanna run from the computer screen
4. then the card transfers the new software to the esc....your ready to go!

i believe there's some nice videos floating around here somewhere demonstrating how to do it also. maybe someone can repost the video.

right. then the box is for setting boost or brakes and timing. stuff like that.

Quote:

Originally Posted by AlanHall (Post 11403328)

right. then the box is for setting boost or brakes and timing. stuff like that.

see i'm learning! lol

The Reventon R brakes are a lot stronger than my Novak. My brothers stadium truck with boost on an 8.5 works awesome (Reventon R)

Ran the pro today it is a night and day difference how smooth it is compared to the tekin rs I have been running.

17.5 blinky stock 0 profile

I bought a used GT2.0 and it is setup in blinky mode.i have the small program box but which setting should I put it on to get the boost and timing? Thanks

Are you asking how to take it off blinky?

Quote:

Originally Posted by jspurgin (Post 11406611)

I bought a used GT2.0 and it is setup in blinky mode.i have the small program box but which setting should I put it on to get the boost and timing? Thanks

If you want to change the esc software you have to use the lcd programmer and update the esc via a software download off the cpu using the lcd programmer.

Ok. Imay have the wrong program box.I don't have a USB cord to go the box from the comp.is it like a Hotwire? I'm kinda new to the speed passion stuff lol

You should have a disc and usb cable. But you may be able to download the pc program if you dont have the disc. Im not certain.

for the GT2.0 series you need that LCD Programmer box to do the firmware updates. Unofficially people have had success using the hobbywing box once you flash its software (the actual box) to use Speed Passion software. I use this box, however, this is not supported by Speed passion, just an FYI.

As for what software to use, what is this going in and what motor?