|
Is the 2.1 Pro Stock capable of running a 6.5 motor in blinky mode? I think according to the manual it is but would like to confirm this before trying.
|
speed passion support
so on accident i crossed my battery wires while connecting battery.
and it smoked the esc. does anyone know if sp repairs them,and the cost? trying to navigate there web page to get this info is impossible. also i heard of some people finding the pro on sale for 120.00? evrywhere i checked it's 139.00 |
Originally Posted by Wildcat1971
(Post 12009125)
I have not trolled this thread in a while. Has the QC on the reventons improved yet? How is the SP customer service. Please dont reply with 100 posts about how reventons walk on water and never break. I am not here to have an epeen esc showdown. I am in the market for an inexpensive esc and the older GT series SP esc's were the bomb. I am looking at the S or R version. Not the pro.
|
What motor does speed passion make for e buggy that's equivalent to a tekin kv 2050
|
Originally Posted by subaru_tech
(Post 12008433)
so on accident i crossed my battery wires while connecting battery.
and it smoked the esc. does anyone know if sp repairs them,and the cost? trying to navigate there web page to get this info is impossible. also i heard of some people finding the pro on sale for 120.00? evrywhere i checked it's 139.00 |
Hideeho
Does any one us the wifi programming adaptor? Are you having any problems? What version of iOS are you running? I got mine a few weeks ago (right after getting my rev r). I connected everything & it worked perfectly. I didn't mess with it again till last weekend. In the interim I updated to iOS 6.1.3. When I tried it again to start messing with timing I would get every indication (solid led & check mark in wifi settings) that it was connected to my phone properly. When I start the app it says the adaptor in the buggy isn't connected. I have reset the card, forgotten the network, reinstalled the app, & tried different static ip addresses. Nothing works. SP has not returned any of my emails, so I'm turning to the community for help. Does any one have a clue what I'm doing wrong? |
Originally Posted by Racermac73
(Post 12014160)
What motor does speed passion make for e buggy that's equivalent to a tekin kv 2050
http://www.speedpassion.net/en/produ...SP000239&c=MTR this is the 2100Kv sensorless motor. I am very curious about the description however as it says: Speed Passion is proud to introduce the revolutionary Blaze series of sensored and sensorless brushless motors for 8th scale applications. Much like Speed Passion's MMM motor series, the Blaze motors feature zero cogging and the smooth low end torque of a sensored system. The Blaze motor series bridges the gap between the raw power and high efficiency of motor design.The best of both worlds is now here for off-road vehicle, or 8th E-buggy and E-truggy. The sad thing is the Kv's that are common for 1/8 buggy on 4S are only offered in a sensorless configuration. :( still no mention of the 550 motors on the USA site ... |
Originally Posted by RB5SP
(Post 12014236)
one of my friends and fellow racer did the same thing on accident and the esc still worked. Did you try to run it again?.
|
;)
|
Warranty For Problem
Hey my I had bought the 13.5 Combo from my hobby shop back in late January and my esc no longer gives me and throttle as well as a sensor wire needle inside somehow has been pushed in what is the turn around from SP on cases like these?
|
is there any was i can get a lower case from somewhere? Had a race yesterday and the case split at one of the corners and it can now move around. I would rather replace it now before it completely breaks at the other corners.
|
Originally Posted by branman18
(Post 12019046)
Hey my I had bought the 13.5 Combo from my hobby shop back in late January and my esc no longer gives me and throttle as well as a sensor wire needle inside somehow has been pushed in what is the turn around from SP on cases like these?
I am waiting for 2 PROS to be shipped back to me.... I really hate that I am the beta tester for this REVENTON series. 3 PRO failures in a row.. The tekin guys at the track have a good laugh at me now.... :( |
Originally Posted by micrors4guy
(Post 12019147)
is there any was i can get a lower case from somewhere? Had a race yesterday and the case split at one of the corners and it can now move around. I would rather replace it now before it completely breaks at the other corners.
Contact SP USA they will sell u cases. I had ordered a few LPF cases i think about 6$ with new decals.. |
Originally Posted by RB5SP
(Post 12014236)
one of my friends and fellow racer did the same thing on accident and the esc still worked. Did you try to run it again?.
|
Originally Posted by Waflet
(Post 12014612)
Hideeho
Does any one us the wifi programming adaptor? Are you having any problems? What version of iOS are you running? I got mine a few weeks ago (right after getting my rev r). I connected everything & it worked perfectly. I didn't mess with it again till last weekend. In the interim I updated to iOS 6.1.3. When I tried it again to start messing with timing I would get every indication (solid led & check mark in wifi settings) that it was connected to my phone properly. When I start the app it says the adaptor in the buggy isn't connected. I have reset the card, forgotten the network, reinstalled the app, & tried different static ip addresses. Nothing works. SP has not returned any of my emails, so I'm turning to the community for help. Does any one have a clue what I'm doing wrong? http://dl.dropbox.com/u/12384377/201...103503_HDR.jpg |
| All times are GMT -7. It is currently 04:25 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.