|
Originally Posted by savannahmick
(Post 11079610)
I have a couple questions about swithching rotors with my SP v3 17.5 and Ultra Sp. v2 11.5/3600 because I noticed the rotors look the same except different turn. Anyway I run nitro but like to mess around with 2wd SCT I would really like to use the can from my v3 17.5 it has much better air flow also I don't have to solder on new connectors and the reason I am wondering is I run at two tracks one is 17.5 SCT other is 10.5 SCT. What effect will switching rotors from a lower turn motor into a higher turn can if compatible have on the motor turn/performance? Might have been stupid question but I am curious! Thanks!
For SCT 2WD stock 17.5...our latest setup is using the super 7 SILVER RED 12.5mm rotor with tall gearing...works great. |
Originally Posted by caltrigger
(Post 11080261)
I have bought a TD DEX410Rv3 and returning to rc after a 7 year break. There are 4 of us wanting to buy the same setup for social racing on our own track. We do not have a local club for 1/10 so we kinda setting our own standard.
We need to choose a motor and esc comination that will be simple and not too programable but that will perform well and have decent speed. Comming from brushed history I need advice on which turn and esc to use. We would like an esc that can handle down to a lower turn if we need. I was thinking 10T 4000Kv or so, would that be too slow? We not experience racers but want something we can grow into speed wise, we also want something standard and ensure all the guys run the same setup, kinda like stock racing i guess. Your comments welcome... |
Originally Posted by Joel Lagace
(Post 11084610)
Anyone on here work for Speed Passion USA?
I have been trying to get 2 new cases for my GT2.0 LPF Brushless ESC units. Back in may contacted Albert at Speedpassion about buying them directly, we exchanged emails and all was set to send me some replacements(price address ect ect)... Weeks passed and nothing, started to email him back june/july and no more responses??? Anyway can anyone help me get a hold of 2 new cases? any color just need to fit my GT2.0 LPF Brushless ESC Thanks. |
Originally Posted by manuelargentina
(Post 11084996)
I've recently updated my new GT2.0 Pro with the 428STOCK software, but is no working. Only have the red light blinking since!!! Steering servo moves but motor isn't. I've turn off all system and try to re-calibrate the radio wiyh no success. Can anyone give me a hand with this please?
Thank you!!! Manuel |
Originally Posted by Autocratic
(Post 11085188)
Just looking for something smaller than the Pro for 17.5. Also, need something that's in stock too.
I hope more will be back instock after September. If you are running blinky or MOD on 1/10th off road...the GT2 LPF or GT2.1 ProStock will work on off road 2WD or 4WD with boost or no boost (with dynamic timing) or blinky....it will be pushing it when running it on 4x4 SCT with mod 550 motor with boost...I personally think that is POSSIBLE but I just have not try it in person nor anyone did any testing for me....most ppl are all running GT2 PRO because they want the best out of it. We do not have anything smaller then the GT2 that can do all these MOD racing with boost...usually the smaller ESC are either thermal or they let the magic smoke out after 4 minutes... The possible smaller unit that will work beside the GT2 PRO...is our new REVENTON PRO. |
Originally Posted by Solara
(Post 11092928)
I can see you want something for the 410 SCT 4x4...unfortunately the ON and OFF ROAD NATIONAL are all happening right now and till the end of August and all the GT2 PRO are reserved for the drivers or already sold out to the drivers.
I hope more will be back instock after September. If you are running blinky or MOD on 1/10th off road...the GT2 LPF or GT2.1 ProStock will work on off road 2WD or 4WD with boost or no boost (with dynamic timing) or blinky....it will be pushing it when running it on 4x4 SCT with mod 550 motor with boost...I personally think that is POSSIBLE but I just have not try it in person nor anyone did any testing for me....most ppl are all running GT2 PRO because they want the best out of it. We do not have anything smaller then the GT2 that can do all these MOD racing with boost...usually the smaller ESC are either thermal or they let the magic smoke out after 4 minutes... The possible smaller unit that will work beside the GT2 PRO...is our new REVENTON PRO. I'm currently running the GT2.0 Pro in my DEX410 buggy and love it. I ordered the ProStock that will go in my DEX210 whenever it gets shipped. I will most likely order another GT2.0 Pro to replace my Tekin RS which is giving me some issues lately. Whats the specs on the Reventon Pro? |
Hey Howard, ended up getting the GT2.0 LPF and I couldnt be happier. My brother went from a Castle MMP to this and its a night and day difference! Looking forward to purchasing more Speed Passion in the future!
|
Whens the revention pro coming out?
|
Originally Posted by Solara
(Post 11092893)
I bet it work now...your PM said it does...thanks.
|
Originally Posted by Autocratic
(Post 11093110)
I don't have a SC truck.
I'm currently running the GT2.0 Pro in my DEX410 buggy and love it. I ordered the ProStock that will go in my DEX210 whenever it gets shipped. I will most likely order another GT2.0 Pro to replace my Tekin RS which is giving me some issues lately. Whats the specs on the Reventon Pro? Reventon PRO spec.....ah, ALOT....140 amps for a starter. Smaller...on board switch. Intercooler channel cooling design. Wifi, bluetooth programming...I am still trying to know all of these feature right now. |
Originally Posted by trickedout
(Post 11093789)
Hey Howard, ended up getting the GT2.0 LPF and I couldnt be happier. My brother went from a Castle MMP to this and its a night and day difference! Looking forward to purchasing more Speed Passion in the future!
|
Originally Posted by onekiwi
(Post 11095084)
Whens the revention pro coming out?
|
Revention pro being used at all in 4x4 SCT yet?
|
Originally Posted by Solara
(Post 11096155)
Late September October....actualy, they are on sale over Asia and Europe...we are trying to get that approved by ROAR...that will take some time.
Also if the GT Pro isn't available whats the next best thing to run mod? EX/LPF? |
Originally Posted by onekiwi
(Post 11096968)
Where, I can't find any to buy?? What do you have to get approved? the esc like lipos? Or is it for stock settings etc?
Also if the GT Pro isn't available whats the next best thing to run mod? EX/LPF? |
| All times are GMT -7. It is currently 08:51 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.