![]() |
Today was the mains day of the Intergalactic Short Course Chamionships at CRC Raceway in Rome NY.
Viper Driver Mark Smyka was on site driving his Viper powered T-RCE Slash 4x4. Look for a writeup on this event in the next couple of days. I am running the Copperhead R ESC and VX4R.45 motor. I'm geared 13/54. I started 10th in the B Main. The way the grid is setup, you all lineup down the back straight, the truck in the TQ spot basically gets a holeshot through the first corner. Everyone else has to blast to the corner, and hope you make it through without a scuffle. The only reason for my post tonight is this. When the tone sounded to start the B Main, we all punched the throttle. I had so much power, I passed 4 trucks in the 100' before the turn. Everytime I hit the back straight, I would pull away from trucks behind me, and catch the trucks in front of me. SOOOOO Much power. The combo worked well all weekend. It shutoff on me once, just as I was finishing a heat, because the battery connector wire came off, but on the battery side, not on the ESC side. After the 8 minute main, in 90+ degree heat, I came off the track at 138 degrees. Cannot ask for more than that, Thanks Viper! |
Originally Posted by godofcable
(Post 11139070)
Today was the mains day of the Intergalactic Short Course Chamionships at CRC Raceway in Rome NY.
Viper Driver Mark Smyka was on site driving his Viper powered T-RCE Slash 4x4. Look for a writeup on this event in the next couple of days. I am running the Copperhead R ESC and VX4R.45 motor. I'm geared 13/54. I started 10th in the B Main. The way the grid is setup, you all lineup down the back straight, the truck in the TQ spot basically gets a holeshot through the first corner. Everyone else has to blast to the corner, and hope you make it through without a scuffle. The only reason for my post tonight is this. When the tone sounded to start the B Main, we all punched the throttle. I had so much power, I passed 4 trucks in the 100' before the turn. Everytime I hit the back straight, I would pull away from trucks behind me, and catch the trucks in front of me. SOOOOO Much power. The combo worked well all weekend. It shutoff on me once, just as I was finishing a heat, because the battery connector wire came off, but on the battery side, not on the ESC side. After the 8 minute main, in 90+ degree heat, I came off the track at 138 degrees. Cannot ask for more than that, Thanks Viper! |
godofcable - How did Mark do he didn't answer my text?? Glad you liked it!! Wish I could gain 4 spots on the opening lap of the a main :D:D
Grasshopper - congrats - sorry, family weekend (after being gone all week) - chasing dolphins in the Atlantic ocean!! The setup you posted is a baseline we have been using for about a year. Guess you liked it. BTW - no never saw that type of error without running before, let me know if it happens again. Steve - I answered your email Andrew - nice upgrade right!!!!:tire::tire::tire::tire: |
Mark qualified 3rd overall and finished 4th.
|
Hi
What to chose for SC race for Slash. I am looking to Coperhead 5150 and VST4.5XL with VTX10R. We are running in big 1:8 scale track. Thanks |
Originally Posted by rcq
(Post 11141671)
Hi
What to chose for SC race for Slash. I am looking to Coperhead 5150 and VST4.5XL with VTX10R. We are running in big 1:8 scale track. Thanks |
One more question. What battery capacity need for VST4.5XL to hold 7min main's?
|
Originally Posted by rcq
(Post 11141846)
One more question. What battery capacity need for VST4.5XL to hold 7min main's?
|
Originally Posted by rcq
(Post 11141846)
One more question. What battery capacity need for VST4.5XL to hold 7min main's?
Eric |
Where is everyone racing this Labor Day Weekend???!!!??
|
Originally Posted by nikos2002
(Post 11157048)
Where is everyone racing this Labor Day Weekend???!!!??
But now to the real question: Is it worth it to pay more and get the VXT10R BE and a VST 8.5t for my B4.1 or should I get a regular VXT10R/VST8.5t combo? 10% off at A Main this weekend and I'm going to be saving a LOT of money. :lol: |
I'll be @ the Warm-up race for the R.A.C.!!! on Saturday!!! And Sunday and Monday will be running some practice @ Rte 281 Speedway in Friedens, Pa!!! I'll be running the Viper Copperhead and 5150kv combo in my SCTE and VTX10 w/ Viper 8.5 in my 22SCT. Still waiting on a 1/8 Scale Set up!!! I will be debuting my RC8be this weekend. Will be buying a Viper VTX10 and 13.5 for my TLR22 this coming week. Prob Labor Day!!! I have a crap load of credits with Amain!!!
|
Grasshoper - get the 10R if you plan on running a crazy low mod motor or use it with a 550 motor in the future. If not, save the coin and get the regular 10.
But we both know if you save money to get the 10, something else will end up in the cart on A Main - it always does :sneaky::sneaky::sneaky: |
Good luck this weekend guys!!! Its a family weekend for me, bunch of events this fall so the family gets me this holiday weekend -- but I am always an iPhone away to keep up with Viper on RCTech!!.
|
Have a great time with the Family as I get to race tonight but then off to a dinner train ride Saturday evening with the Family in CA...:D
|
| All times are GMT -7. It is currently 01:47 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.