|
Originally Posted by WideOpenThrottle RC
(Post 10290903)
For those of you inquiring about running sensored motors on the copperhead I encourage you to try the copperhead combo first. I previously ran the Teking Pro 4600 and after installing the copperhead combo in my SCTE I sold the tekin stuff. Not saying Tekin was bad but for half the price the copperhead system is just as competitive in my opinion. Once it's on the track you cant even tell its a unsensored system so I would try it before worrying about having a sensored setup.
(had the RX8, it was able to run both type motors, not sure abt other systems) thanx guys for clearing things up:nod: |
For the 4x4 slash, the 4500 is ideal for bashing or racing. If you want to go really fast, get the 5150.
|
I am thinking about giving the Copperhead 4500KV system a try in my SC10 4x4. I have always been a fan of sensored motors but it seems like these may have a chance to change my mind.
|
Originally Posted by hlpressley
(Post 10294072)
I am thinking about giving the Copperhead 4500KV system a try in my SC10 4x4. I have always been a fan of sensored motors but it seems like these may have a chance to change my mind.
|
Well i just ordered a copperhead 5150 combo to try in my scte. Have been runnin mmp/ 4600 tenshock and its been good. I tend to try the different stuff as most everyone i race w/ runs rx8/pro4 combos. I am one of the faster guys at the track and get asked alot about my setups so i hope this system is as good as u all make it out to be and i will be selling a few more of these for u lol......i would b up for testing any 1/8E buggy products u may have in the works as well ;)
|
If anyone has any suggestions on gearing with the 4600 in an SC10 4x4 I would appreciate it.
This whole SCT thing is pretty new to me. :o |
Start with 14 tooth pinion and stock spur. Check temps and adjust for track size and ambient temps. Do not rely on the "touch method"; get a decent quality temp gauge and check at 5 min. intervals.
|
Originally Posted by Arigato
(Post 10294975)
Start with 14 tooth pinion and stock spur. Check temps and adjust for track size and ambient temps. Do not rely on the "touch method"; get a decent quality temp gauge and check at 5 min. intervals.
|
Would the 5150kv be good for a Losi scte? I'm hearing a lot of good things about this system. Wanting a reliable racing system
|
Originally Posted by Mxer59
(Post 10295108)
Would the 5150kv be good for a Losi scte? I'm hearing a lot of good things about this system. Wanting a reliable racing system
|
Originally Posted by nikos2002
(Post 10295131)
Yep!!!! We did a lot of testing using the SCTE. Its a good fit.
|
Originally Posted by EastwooD-
(Post 10294968)
Any chance there is a brick and mortar selling a copperhead in the tacoma area? I would like to race on saturday. I know that they are based out of redmond, wa.
|
Originally Posted by Mxer59
(Post 10295242)
Does the combo come with programmer
Here is a link to the Copperhead instructions to show what different profiles are available to you. Copperhead Instructions |
Looking for a comparison between a 4 pole 540 Castle 3800 and Viper's new 4 pole 540 3900 motor.
Anyone had both and can speak to the differences between the two? |
Originally Posted by nikos2002
(Post 10295131)
Yep!!!! We did a lot of testing using the SCTE. Its a good fit.
Thanks |
| All times are GMT -7. It is currently 02:52 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.