|
Any reason I should buy this 4 pole sensored motor over the other 4 pole sensored motors?
|
Originally Posted by symmetricon
(Post 9598989)
Any reason I should buy this 4 pole sensored motor over the other 4 pole sensored motors?
|
Originally Posted by Jtipsy
(Post 9598545)
Thought it was you ar first Rick, then noticed the back end was black and was like nope not him.
|
Im assuming they are gonna be sold in combo with the new speedo, so what does the street price look like, and any idea when they will hit the store shelves?
|
Originally Posted by symmetricon
(Post 9599048)
Im assuming they are gonna be sold in combo with the new speedo, so what does the street price look like, and any idea when they will hit the store shelves?
Here is the R52 (5200kv)
And the R45 (4500kv)
|
||||||||
Originally Posted by SaladFork
(Post 9600520)
We are aiming for the $150 price range for the VX4R Copperhead System and a little lower for the VX4 System (3mm shaft, 2wd focused). No hard date yet but we are also aiming for mid/end of November. We are only offering these as a combo. The Copperhead ESC has ProGauge programmable with 5 set profiles. When I have some shots of the ESC I will post them.
Here is the R52 (5200kv)
And the R45 (4500kv)
|
||||||||
The graphic is Cheesie -_- Stick to your Beefy designs as you started off with.
The 10th scale motors seems to be great !!! I love your ESCs and their programmers. The 8th scale 2 polers motors seems to just fail in power output. And now cheesie graphics that seems to be printed on Paper stickers that can just Cook right off the motor ... And then you got some of these people that cant solder worth of crap and just Burn the stickers right off also What I would like to see is some quality CNC Motor Housing with a Nice Laser Etched graphics on the can. And ABC should be etched into the can also while we at it =D |
Originally Posted by iPearl
(Post 9600768)
The graphic is Cheesie -_- Stick to your Beefy designs as you started off with.
The 10th scale motors seems to be great !!! I love your ESCs and their programmers. The 8th scale 2 polers motors seems to just fail in power output. And now cheesie graphics that seems to be printed on Paper stickers that can just Cook right off the motor ... And then you got some of these people that cant solder worth of crap and just Burn the stickers right off also What I would like to see is some quality CNC Motor Housing with a Nice Laser Etched graphics on the can. And ABC should be etched into the can also while we at it =D |
Originally Posted by iPearl
(Post 9600768)
The graphic is Cheesie -_- Stick to your Beefy designs as you started off with.
The 10th scale motors seems to be great !!! I love your ESCs and their programmers. The 8th scale 2 polers motors seems to just fail in power output. And now cheesie graphics that seems to be printed on Paper stickers that can just Cook right off the motor ... And then you got some of these people that cant solder worth of crap and just Burn the stickers right off also What I would like to see is some quality CNC Motor Housing with a Nice Laser Etched graphics on the can. And ABC should be etched into the can also while we at it =D We had a few meetings about the look of the motor and should we use a sticker or aluminum. And ultimately it came down to what's under the sticker. :sneaky: We also eliminated soldering by using bullet plugs on the ESC, 5 profiles. Wires from the motor plug directly into the speed control. The VX4 setup is geared towards club racers and bashers. It's for peeps who don't want to spend $300.00+ on a system just to bash or only race a we times a month. Or the hard core racer who is also on a budget. The money we saved by using a sticker is spent on adding more FETs to the ESC. ;) |
|
Now thats looks a bit better.
So these are budget motors, w/o the Bling ? Wires will still be coded somehow ??? More fets in the ESC ? Will the ESC be based of the VTX10 just w/o the Sensor port ? Or will it be a VTX10 w/o the sensor ports Plus more fets ? Do you have any renderings of the ESC ? AND when will ya'll redo the 8th scale motors ? |
Originally Posted by iPearl
(Post 9604305)
Now thats looks a bit better.
So these are budget motors, w/o the Bling ? Wires will still be coded somehow ??? More fets in the ESC ? Will the ESC be based of the VTX10 just w/o the Sensor port ? Or will it be a VTX10 w/o the sensor ports Plus more fets ? Do you have any renderings of the ESC ? AND when will ya'll redo the 8th scale motors ? |
Dumb question, but can you run a brushed motor with a vtx10? Got a brushed setup in the buggy now and the speedo crapped out. I found a good deal on on a vtx10 and was just wondering if I could run it for now till i get more cash for the motor upgrade.
Nick |
Originally Posted by Cautrell05
(Post 9604698)
Dumb question, but can you run a brushed motor with a vtx10? Got a brushed setup in the buggy now and the speedo crapped out. I found a good deal on on a vtx10 and was just wondering if I could run it for now till i get more cash for the motor upgrade.
Nick |
Originally Posted by EastwooD-
(Post 9604883)
This is a very good turn of events for you guys. Im glad to see a more local (to me atleast) vendor. You guys are only about an hour and thirty minutes away from me, so support would be easier to get to. When the 4wd sensored version comes out im going to be on your door step wanting the first one!! :lol:
The new VX4 System will be on display at iHobby in Chicago this year. I posted more info about the system on the website - http://viper-rc.com/vx4.html :D |
| All times are GMT -7. It is currently 06:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.