![]() |
Originally Posted by smokinu
(Post 9305875)
they are shipping now! now should be in in 7-10 days.
|
Iim at the track,getting a green and orange flashing error. Tried rebinding,new sensor wire, new motor...no dice. Ran fine in practice, any ideas
|
Originally Posted by imajerky
(Post 9306475)
Iim at the track,getting a green and orange flashing error. Tried rebinding,new sensor wire, new motor...no dice. Ran fine in practice, any ideas
what is your esc/motor temp cut offs at? |
Quick question...I have the viper Vtx10 esc...can this speedo run a 550?
|
Originally Posted by elas
(Post 9306907)
Quick question...I have the viper Vtx10 esc...can this speedo run a 550?
|
Originally Posted by smokinu
(Post 9306812)
green an orange.. dont know about that.
what is your esc/motor temp cut offs at? |
Originally Posted by imajerky
(Post 9307045)
stock settings. I have had no problems for a few weeks. Was really pleased with the ESC until tonight. I encountered this problem before the first heat. Got it to connect and run, after six tries to recalibrate (it was giving me the search for neutral green, reset dead band to middle, no dice)..... everything was fine except absolutely no brakes..drag brake yes, push brake no. Tried turning up the radio EPA, brake strength. I ended up running the main with 45% drag brake, not so cool. I'll check the website
|
Originally Posted by elas
(Post 9306907)
Quick question...I have the viper Vtx10 esc...can this speedo run a 550?
|
Originally Posted by Tim3
(Post 9307246)
The VTX10R can.
;) |
how are these new 550 motors for 1/8 scale buggies.what size would be good?
|
will they work with 4s battery
|
Originally Posted by chad423
(Post 9308979)
how are these new 550 motors for 1/8 scale buggies.what size would be good?
|
Ran my hyper10sc with the full viper setup this weekend. and I have to say WOW!!
I think my gearing is off though. the esc temped at 165 and motor at 140 most of the day. BUT, I didnt drive it too hard as I wasnt pushing it since I was hanging out in front through the quals. In the main the pipes kept moving and getting in my way for some reason:lol::lol: so I had to push from 3rd to get back to first I ran down second and took it but the truck shut down, no throttle but I had steering. no lights flashing on the esc and temps were 196 esc 160 motor. I turned it off and it wouldnt turn back on. So I marshalled and ran my nitro classes. came back and it turns on and seems fine. I assume I hit thermal protection? the motor is a viper 550 4.5 with a 14 tooth pinion. Im thinking it needs a 12-13? |
Originally Posted by vypr2002
(Post 9312461)
Ran my hyper10sc with the full viper setup this weekend. and I have to say WOW!!
I think my gearing is off though. the esc temped at 165 and motor at 140 most of the day. BUT, I didnt drive it too hard as I wasnt pushing it since I was hanging out in front through the quals. In the main the pipes kept moving and getting in my way for some reason:lol::lol: so I had to push from 3rd to get back to first I ran down second and took it but the truck shut down, no throttle but I had steering. no lights flashing on the esc and temps were 196 esc 160 motor. I turned it off and it wouldnt turn back on. So I marshalled and ran my nitro classes. came back and it turns on and seems fine. I assume I hit thermal protection? the motor is a viper 550 4.5 with a 14 tooth pinion. Im thinking it needs a 12-13? Orange and red Leds should have been both lit up on the switch they wont blink they just glow ;) and yes you need to gear a 4.5 in the hyper 12-13t. 14 if your on an 1/8 size track with a decent straight! Remove the Motor cut off as is yourr motor at 160 or below is just fine 110-140 is where i tend to keep mien. The esc shut off on you for sure 196 is a bit HOT! really i suggest a 5.5. i dont get why people need to run the 4.5 a timined 5.5 is just as fast and a little easier on the esc/drivetrain/batteries. |
thanks for the info smokin. and yes I do run this on an outdoor 8th track. our indoor is too tight and not really that much fun with the 4x4. Ill keep the catsx for that.
|
| All times are GMT -7. It is currently 05:03 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.