thanks alot

http://www.rceasy.com/2010/04/20/san...3x/#more-30573

do this rx do not work in ssr mode with no sanwa speed and servo in ssr??

That receiver only works with digital servos. In ssr you need to use a ssr servo.

so the 451 will do the job with my hitec servo!!

can you guys tell me what type of gears are in the Sanwa HVS-ZS servo

Are they all metal or Ti and good for 1/8 nitro offroad

they are metal gears...

all the way through? no hybrid gears at all

http://www.youtube.com/watch?v=YDFMhyA4rHw

they are metal

it says hybrid gears on its website as well. not sure wat it meant though...

yeah thats what concerns me...

i can't get hitec here without paying an arm and a leg... so i went out and bought the hvs zs... will give it a try and let u all know...

I know the first gear on the sdx-901 is plastic, I have one torn apart waiting for parts now. The weak point on this servo is the case(on my third). There are no bushings for the pins that hold the gears, so they wollow out the case and get sloppy.

http://translate.google.com/translat...ate.google.com

The link shows that the rx-442ds should work with the m11x, but I can't get any of the three I have to bind. I changed the transmitter to fh2 and follow the bind procedure, and it actually flashes the light on the rcvr like it is binding, but the light never goes solid. Am I doing something wrong?

Looking forward to your report. I'm also considering this servo.

yeah me too i want to know if this serie of servo are good!