R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   NOVAROSSI Engine thread.... (https://www.rctech.net/forum/offroad-nitro-engine-forum/353301-novarossi-engine-thread.html)

Chris Reilly 02-19-2013 11:54 AM

Does one of these fit the Crono RS-5? Think it's similar to the P5.

I beleive it's the 25.8mm rear bearing 13016 back plate. Which would make it a PP-4 required. Please verify.

mick8488 02-20-2013 11:57 PM

Max power pipe
 
Wrong thread! Whoops

EBMods 02-21-2013 06:01 AM


Originally Posted by Chris Reilly (Post 11835529)
Does one of these fit the Crono RS-5? Think it's similar to the P5.

I beleive it's the 25.8mm rear bearing 13016 back plate. Which would make it a PP-4 required. Please verify.

If the engine uses the 13016 back plate then the PP-4 is correct.

Chris Reilly 02-21-2013 09:33 AM


Originally Posted by EBMods (Post 11843532)
If the engine uses the 13016 back plate then the PP-4 is correct.

I will have to check the manual. Monty might know off the top of his head.

GMS_Racing 02-24-2013 03:44 PM

Does anyone know if you can put the new keep off bearing in a bonito?

xc7 02-24-2013 03:49 PM

No, keep off has a new case designed for the new bearing.

GMS_Racing 02-24-2013 04:13 PM


Originally Posted by xc7 (Post 11856666)
No, keep off has a new case designed for the new bearing.

Thanks

How bout after break in on a bonito do I need to adjust shims at all or if I'm running 30%?

houston 02-25-2013 07:16 AM


Originally Posted by Chris Reilly (Post 11835529)
Does one of these fit the Crono RS-5? Think it's similar to the P5.

I beleive it's the 25.8mm rear bearing 13016 back plate. Which would make it a PP-4 required. Please verify.

Every rs-5 i had was 25.4mm

Herrsavage 02-26-2013 02:14 AM

Sorry if this has been asked before, but what is the difference between a P5XLT and the new Beat B5?? Have found both for decent prices..(the latter for €10 more.. - €169..)

Herrsavage 02-26-2013 02:14 AM

Sorry if this has been asked before, but what is the difference between a P5XLT and the new Beat B5?? Have found both for decent prices..(the latter for €10 more.. - €169..)

kgombe 02-26-2013 02:33 AM

no difference.. its exactly the same engine...

Herrsavage 02-26-2013 02:42 AM

'K.. Thanks.

kelv 02-28-2013 07:26 AM


Originally Posted by Hobbs263 (Post 11809934)
2096 with a 41021 header

Hi,

i am running a nova 4btt with a sirio pipe as it seems to provide a sweeter and smoother power band plus better fuel consumption. plug c6tgc. average ambiance temp 80 - 100 F.

i have a nova 9901 pipe with 41021 but the combination does not feel as lively.

would appreciate if i could get someone could share their experience with the different combination of nova pipes/header to suit the 4btt n bonito.

thank
kelv

Buster661 02-28-2013 10:38 AM


Originally Posted by kelv (Post 11873036)
Hi,

i am running a nova 4btt with a sirio pipe as it seems to provide a sweeter and smoother power band plus better fuel consumption. plug c6tgc. average ambiance temp 80 - 100 F.

i have a nova 9901 pipe with 41021 but the combination does not feel as lively.

would appreciate if i could get someone could share their experience with the different combination of nova pipes/header to suit the 4btt n bonito.

thank
kelv

I ran the 21/9901 combo for the last year and thought the same thing. Per suggestions from CRE and HES on here I switched last week to the 41001/9886 combo and all I can say is wow !! Such a big difference in overall power and I did not notice and change in milage. I did this in my MBX7 with a BTT Plus 4.

beidle99 02-28-2013 10:51 AM


Originally Posted by kelv (Post 11873036)
Hi,

i am running a nova 4btt with a sirio pipe as it seems to provide a sweeter and smoother power band plus better fuel consumption. plug c6tgc. average ambiance temp 80 - 100 F.

i have a nova 9901 pipe with 41021 but the combination does not feel as lively.

would appreciate if i could get someone could share their experience with the different combination of nova pipes/header to suit the 4btt n bonito.

thank
kelv

I run the 2096 with the 41021 on my plus 4, very smooth, great top end and run time. Some have reported good results running the 9901/41001 header but I havn't tried that combo yet. What sirio pipe are you using? my plus 4 liked the 2058 but I found the 2096/21 to have the same top end but better run time.


All times are GMT -7. It is currently 03:00 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.