I was looking for a p5. and I could not find a place that sells them besides a main hobbies. I was wondering what other places sell them thanks.

http://www.absolutehobbyz.com/produc...products_id=89

http://www.houstonsengineservice.com...products_id/63

get a huston tuned p5 the things smoooth as glass rips and it got top end for days

:nod: +1 to that !! Monty's the man

BTTA tune?
 

I am having a hard time with my tune on my BTT and I have a Nitrotec also and always had a good tune on it. Anyway I have my needles at about flush on top and bottom and about 1 1/2 gallons on the mill 7.5 insert with a RE10 Losi pipe. I am having a hard time finding the sweet spot the bottom seems weak and the top is not consistent I hear it pick up about halfway down the straight. I guess it's rich on bottom but smoke is thin and ldle moves up and down if I lean it on bottom also the top blubbers down the straight if I go above flush on top. Not flaming out but don't seem to have the performance I expected my Nitrotec had more power. Temps never above 240f and sealed up motor good also new tank and lines. I was working on the tune today but rain decided to ruin our points race and I am just looking for some advice on what I should try to get it right! Thanks Again!

wrong pipe dude
re12 2096 or 9901

Yeah I am going to get a new pipe soon but I hoped it would work as well as it did with my Nitrotec but I guess not I do have a RE11 also maybe I should give it a try. Which of the pipes has a better bottom because we have jumps coming out of corners and short runs between jumps? Which do you recommend? Thanks!

i am not monty but i say a 2096 has more bottom snap
maybe try a hard clutch spring to

Anyone know if the updated carb comes with the 2012 BTTS or is the carb a option part?

yep deff wrong pipe you will need a 9901 and long hard header thats it its a sweet engine very smooth

Can anyone give me a quick rundown on the differences between the plus4 BTTA Tuned and the plus4 BTT Tuned? Is there ceramic bearing the only difference, and is it worth the extra $ for the BTT?

Ceramic rear is the only difference
worth the extra $ ? Thats a question you need to answer yourself

Novarossi bearings are pretty good in steel or ceramic

Thanks for the answer...

Right now I have a P5 XLT with a 9901 and was looking for a motor thats a little softer on the bottom with better topend. Is there a better pipe to run or would the 7 port Bonito be the way to go?

You r on the right path with the plus4 ;) :nod:

novarosi toro flameouts.
 

hi all. im running a nova toro. 9901 and 41021. using byron 30% and c6tgc.
what is a good baseline setting for the hsn and lsn and idle gap to get the engine running in a race. Ambient temps around 28-30 deg c.engine is fully broken in with good compression.