![]() |
Originally Posted by Mo Denton
(Post 10877747)
hard to beat the dependability of Werks Racing Products
http://www.liverc.com/news/race_resu...e_Champs_Rd.5/ |
how long dose the brake in take on a new motor?
|
Originally Posted by vito
(Post 10884675)
how long dose the brake in take on a new motor?
Seriously, it depends on a number of factors. Type of fuel (oil content), whether any extra caster oil was added, brand of engine, break in method and etc. Plan on about a gallon of fuel + or -. |
race gen 2 with oil at % 11
|
Your break in is done when you have fully completed the break in instruction as indicated in my guide on post 1. Just follow the directions if you do not know what you are doing and you will be fine.
|
can i run 20% nitro with more oil in it. or the 30 with 9% oil ?
|
I had a snafu happen with my B5 this racing weekend. My air filter came off on my RC8.2 buggy during qualifiers and the engine flamed out. The B5 is my first nitro engine and is / was an absolute beast. I'm wondering if the engine is a loss or if there is anything I can do to repair it. The engine feels like it has good compression still. It passes the flop test. The engine has three gallons on it. Suggestions?
|
Originally Posted by E1 Diablo
(Post 10902918)
I had a snafu happen with my B5 this racing weekend. My air filter came off on my RC8.2 buggy during qualifiers and the engine flamed out. The B5 is my first nitro engine and is / was an absolute beast. I'm wondering if the engine is a loss or if there is anything I can do to repair it. The engine feels like it has good compression still. It passes the flop test. The engine has three gallons on it. Suggestions?
|
all i got here is traxxs top fuel 20 is this be ok.
|
Originally Posted by vito
(Post 10904228)
all i got here is traxxs top fuel 20 is this be ok.
|
iam get race gen two 3000 from amain now. its bin 3 weeks for it here and no word yet on it time to move on
|
Do I need to use a higher oil content for break in or can I break in using my 30% Nitro 9% Oil VP?
|
b5
Well ,last weekend I threw a b5 pro into my 6T and we have a track here in Aust with big long straight and sweeper bend and you can get some speed done there ,well with the 2013 pipe this thing revs to the moon .can definetly see the 40k plus rpm .
Can definetly say its a awsome truggy engine ,run time wish it was better think I was just under 10mins ,might need to use a 6.5 restrictor and lean out again do I can be comftorable with 10 minute stops .. |
Originally Posted by vito
(Post 10904260)
iam get race gen two 3000 from amain now. its bin 3 weeks for it here and no word yet on it time to move on
Anything, but not Traxxas. |
Originally Posted by nitroexpress
(Post 10905901)
Shouldn't take that long. Give them a call, they're good people.
Anything, but not Traxxas. |
| All times are GMT -7. It is currently 01:25 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.