Www.houstonsengineservice.com ;)

Sweet new p5's
 

Do they make the new versions with a standard head button? I am going to break down soon and get a houston tuned version of that new p5. I bet it hauls bootie........Thanks Monty for your feedback.....Fastest response of any email I've sent to date.

Merdith

thanks to the G1 from tmobile ;)

just lmk what you need

i am pretty stacked up right now so bare with me guys , it might take a little while to receive your tuned engines :tire:

Does anybody want anymore plus 4 team engines ? Lmk

Monty, Are the new P5XL's going to be like the new turbo version, with the black case and sealing o-ring? And the filled crank is the $15 option and not a diffrent crank right? Thank's.

Monty do you sell TKO ceramic bearings? I know you do the service, but I'm
going to install them my self. I'm resurrecting my old P5xs. I know that TKO
rear bearings are good, but are the front TKO ceramic bearings just as good?

Thanks.

p/s do you also sell the piston wrist pin clips?

sent you a PM Monty. :)

Hey Monty I was wondering could a guy still get a p/r/s and crank for an 821B also wondering will the tero nero crank work in a 821b?

Yes on the 821b p/s/r and no on the crank :)

Toro nero is its own design :D

So I can't get a crank for the 821b but I can get p/s/r.

Hey Monty, are the general needle settings for the +4 that Adam Drake gives in the Fusion Motorsports video the same for the +4C? Got a little off chasing a clutch prob and wanted to be sure I was right again. Thanks. BTW, got the package last week, thanks.

depends on the pipeset

usually around 4-4.5 turns out on lsn , 3.25 -4 turns out on hsn .

i run nova plus4 motor with the 9901 pipe, i have two rb pipes can houston or someone tell me how these pipes perform against the 9901 nova pipe the header i use with the nova is the 9021 or something like that
RB 3001
RB 2045
i have both the 192 and 198 header

im looking for runtime which rb pipe combo is better it would be good to use these pipes as they are sitting around

What kind of runtime you need? A guy at my track got 12 mins with his plus 4 and 9901 pipe. I here that is the best one for runtime.

yeh im getting 12min with that setup plus 4 9901 just would like to use these pipes and want to no what to expect
2045 rb
3001 rb
i want to know the difference between them