Originally Posted by Trevor Williams (Post 6242618)

Monty....what is your thoughts on the Sirio 2013 pipe/header with that 21-7BT...also, did the 21-7 and the Odonnell heads go out yet? thanks brudda', I appreciate all the support!

Originally Posted by houston (Post 6242895)

and why are you up at 2:?? your time ? holy smokes :)

Originally Posted by Trevor Williams (Post 6242902)

just got done wrenching on car getting ready for tomorrow's practice........im gonna burn at least a gall tomorrow.........I need some wheel time :tire::tire::tire:

Originally Posted by houston (Post 6242119)

with a flywheel mounted ?

and its a brand new engine ?

Originally Posted by JimRohrbeck (Post 6243798)

I have just purchased a novarossi .28 5 port new out of the box i can turn it over by hand on the crankshaft with plug out. I this normal or is something wrong with my new motor. I doesn't feel like any other nitro motor I have had



motor is brand new never run out of the box on friday
no flywheel mounted, turning crankshaft with my fingers

Originally Posted by houston (Post 6242119)

with a flywheel mounted ?

and its a brand new engine ?

Originally Posted by houston (Post 6244460)

did you buy it from someone who said it was new ?


that sounds very odd :nod:

Originally Posted by JimRohrbeck (Post 6244472)

I purchased It from A-main hobbies it was new in a sealed box and a sealed plastic bag.
Yes it does have a piston in it. I build race motors for full size sprint cars so I think i have a good understanding of engines.

Originally Posted by houston (Post 6244486)

its a plus 28-5 and you can turn it over by hand huh?

no , you should not be able to do so for sure . there is definitely something wrong with the picture here . maybe you should call Amain and see what they can do for you ;)

Originally Posted by JimRohrbeck (Post 6244515)

I called A-Main and the tech I spoke with was not very knowledgeable on nitro stuff. They refered me to Fusion I called there but Jim Is gone for a week at a race. I guess I will wait till he gets back.
I did not figure it was right but I wanted to make sure.

Thanks for the info.

Originally Posted by Jaz240 (Post 5604197)

Come back to Arizona and tune my Engine!!!!! I got gypped..you never tuned my engine!!!!..I'll be calling before the summer for a new mill

Originally Posted by Jaz240 (Post 5605987)

GO GET EM MONTY!!! This thread should help people realize you know what you are doing and what you are talking about, and why would they not want to buy one of your Moded Mills:nod: