R/C Tech Forums
Page 36 of 130
« First
26
34
35
36
37
38
46
86
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Team Orion Engines (https://www.rctech.net/forum/offroad-nitro-engine-forum/282133-team-orion-engines.html)

pitpop 02-01-2011 08:28 PM
Originally Posted by team316 (Post 8574905)
Pitpop
Does the Alpha Discovery 5 port have a significant performance advantage over this 3 port engine. You had said that you didnt like the 2066 pipe but what about the 2013 or the 2057, 2058 pipes with this engine. I guess I am wondering if the little extra money for the ABI tuned and the lightened head is worth it, because the Alpha Discovery's are back ordered. Thanks

I am building my NEW MBX6T I attached a couple pics.
nice paint job :nod: these two engines are very close... I think I give the nod to the discovery, just because it's newer technology and has the new carb, but the 3 port is a great engine. One of my favorites of all time. I know I'm not much help, but it's just as hard for me to make up my mind as it is for you :lol: If it was me buying the engine?... I would do the 3 port. I wouldn't run the 2057 either unless we were in Europe, then it might work. 2013 and 2058 are the way to go... for your truggy, use the 2013.

keithw11 02-02-2011 05:03 PM
i just bought a orion mte .21 engine pipe combo is this a good motor i have never ran orions also i have sheets of od 97t plugs will they work with this motor and is the 2013 that comes with this motor going to be ok in my buggy and i have 2035 2053 all jps 2060 will this be any beter i am looking for good fuel consumtion and smooth power good power and what inserts work in this motor thanks for any help

pitpop 02-02-2011 06:28 PM
Originally Posted by keithw11 (Post 8590589)
i just bought a orion mte .21 engine pipe combo is this a good motor i have never ran orions also i have sheets of od 97t plugs will they work with this motor and is the 2013 that comes with this motor going to be ok in my buggy and i have 2035 2053 all jps 2060 will this be any beter i am looking for good fuel consumtion and smooth power good power and what inserts work in this motor thanks for any help
That's a great engine. Idle a few tanks and break it in slowly. After running rich for about 3/4 to a gallon, you can lean it out. 2013 is King. We use 6.5 inserts in most of our engines. Not sure about the OD plug... :confused:

RePeTe 02-02-2011 07:00 PM
i have run the 97T on mine with great success

ScottyM 02-02-2011 07:32 PM
Originally Posted by keithw11 (Post 8590589)
i just bought a orion mte .21 engine pipe combo is this a good motor i have never ran orions also i have sheets of od 97t plugs will they work with this motor and is the 2013 that comes with this motor going to be ok in my buggy and i have 2035 2053 all jps 2060 will this be any beter i am looking for good fuel consumtion and smooth power good power and what inserts work in this motor thanks for any help
The 2013 will be an awesome pipe for that motor.. I've considered the MTE engine, but I am holding out for either a Tebo Or King Worlds edition combo..

pitpop 02-02-2011 07:53 PM
where's the like button? :lol:

trickedout 02-02-2011 08:55 PM
So whats to come of the MTE edition of Engines now that Mike has signed with Nvision???

Bigedmond 02-02-2011 09:07 PM
Originally Posted by trickedout (Post 8591898)
So whats to come of the MTE edition of Engines now that Mike has signed with Nvision???
I was thinking about that too. Guess they will be discounted heavily now. I am surprised they put that much effort in having an engine with his name, and not signing him long term.

ON A MISSION 02-02-2011 10:08 PM
I would'nt really worry about it, that same motor is already released without his name on it.

ON A MISSION 02-02-2011 10:31 PM
Originally Posted by pitpop (Post 8591096)
That's a great engine. Idle a few tanks and break it in slowly. After running rich for about 3/4 to a gallon, you can lean it out. 2013 is King. We use 6.5 inserts in most of our engines. Not sure about the OD plug... :confused:
Paul do you have the part number for the 6mm insert or the link to amain. Thanks Paul

ON A MISSION 02-03-2011 06:51 AM
I was also looking for the 6.5. Thanks Paul

nsr250repsol 02-03-2011 12:43 PM
Originally Posted by pitpop (Post 8548869)
I'm too proud not to post this! :lol:

http://www.horizonhobby.com/Products...rodID=ORI80681

I'm really surprised, what a great price! Team Orion really has their price points in order, pretty amazing.
I was in the market for a new motor and couldn't resist the price! My order is in just waiting for the kit to be released.

johnnyboy 02-03-2011 12:45 PM
Pitpop - You guys ended up running the #6 plug at CRCRC?

keithw11 02-03-2011 05:59 PM
evryone thanks for the help the only other question i have is which inserts fit the crf mte .21 novarossi picco werks or are orion just diff from the rest
thanks aging

ON A MISSION 02-03-2011 07:01 PM
I believe works. I asked paul for some amain part numbers.


All times are GMT -7. It is currently 03:30 AM.
Page 36 of 130
« First
26
34
35
36
37
38
46
86
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.