|
these new motors look awsome i cant wait for them to be released the suspence is killing me :eek:
|
which jp pipe would you guys suggest?
i know there are other pipes but ??????[/QUOTE] i know a few who run the 7 port go tech and use the jp 4 pipes still good power and getting 11 mins run time |
Originally Posted by mattwoodcraft
(Post 5978879)
these new motors look awsome i cant wait for them to be released the suspence is killing me :eek:
If your getting one for nothing give the JP pipe a try, but I wouldn't buy one for a GO. Like Pato said, they don't combine well with the GO engines. Buy a GO 2072 and stand back :sneaky: |
which one is better ebmods ebm5 fully modified or massivemods MM5 5port?
|
i wouldnt get a jp pipe myself for these engines only Go pipes for my self :) but after seeing a 7 port go he was using a jp 4 pipe with good run time and power
|
Originally Posted by beer
(Post 5979211)
which one is better ebmods ebm5 fully modified or massivemods MM5 5port?
excellan customer service |
Originally Posted by looper
(Post 5978609)
i have 2 of them here, the "new" one i was running and a spare that really needs a repinch. the new one i think the block and carb are throw away, when trying to remove the carb i was having alot of difficulty getting it to budge so out came the vise grips so the carb is for all intents ruined and it still hasnt moved.
Shipping the 2 of them in the us via priority mail would be about 7-8 bucks so any offer over that i will consider, the "new" one doesnt even have any scratches on the head and the glow plug is still good. they are the blue head b21's |
one you could just make a key ring out of the piston rod :eek:
|
Originally Posted by grizz1
(Post 5978792)
Well guys, from what we have gleaned out of a few people, it would be a fairly safe bet that these GX motors are the new Gen 6 version ?? Improved cooling head, Gen 5.5 carb (maybe improved some more - maybe a short LSN needle), Ti Ni coated 5.5 crank and wrist pin, perhaps an improved and modified rod ? - not sure.
That should keep everyone in suspense for a while until we find out more :D Massive Modds?Racefactor? anyone taking backorders.....damn i cant wait |
Originally Posted by beer
(Post 5979211)
which one is better ebmods ebm5 fully modified or massivemods MM5 5port?
|
Originally Posted by grizz1
(Post 5978792)
Well guys, from what we have gleaned out of a few people, it would be a fairly safe bet that these GX motors are the new Gen 6 version ?? Improved cooling head, Gen 5.5 carb (maybe improved some more - maybe a short LSN needle), Ti Ni coated 5.5 crank and wrist pin, perhaps an improved and modified rod ? - not sure.
That should keep everyone in suspense for a while until we find out more :D |
Originally Posted by beer
(Post 5979211)
which one is better ebmods ebm5 fully modified or massivemods MM5 5port?
ebmods 5 port is nice i run the race tuned in truggy but if you are putting in buggy then fully mod will be great in there. i have never ran mm motor but from what the guys on here say they rip too. but i love my ebmods motor gets good run times and lots or power |
I run a Caster Grenade version of the Go tech 5 port and the thing really rips.Is there a difference between it and the Go tech 5 port?My buddy has a Go version and mine seems stronger.
|
so are these officially Gen 6 engines?
|
How do you tell which generation you have?
|
| All times are GMT -7. It is currently 01:45 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.