sorry from the exhaust to the tank ...

Mhh interesting.. in UK people advise 7-9max...

What you would say about fuel pipe lenght, similar?

Ouch, it's sad..

I believe what grizz really said that if you followed posts from this thread, especially what grizz was writing it you needed to be at least in tuning ball park...otherwise what can I say, from thousands Go's you got black sheep:(
I would send a mail to the shop from where you bought and it might be sort out for you:nod:

I still trust on Go engines, look on this thread, there is soo many happy users;)

i run as much fuel tube as possable when they cc the tank it be 1-2 cc under leagl race limit :) its not as important as the pressure line...

what size go tec is it and how much do you want for it?

Not good looper i wonder what went wrong:confused:

im with Matt 100% on the fuel line! approx 1.5 below legal limit and my presure line is the same length!

i also measure and write down what the lengths and what type the line is and put it with my setup sheet so when ever i need to replace it for whatever reason i know what length its meant to be to remain legal.

Mike

LOL, I wonder if he'll come back to answer you. To be honest, I've put mine aside for awhile due to tuning during break in too. cant get it to run for 2 minutes without dieing. think the lsn may be TOO rich for one, but I've piddled with it for 6-7 tanks, got frustrated, reset it , sealed it and did a carb swap to see. In the end, I've set it aside for awhile so I don't just give up on it. (5 port with 1.42 factory lsn that I got new last summer) Never had an engine give me this much grief during break in. Interesting for sure, and I could just feel the potential,when it was running, but it got my goat so to speak. I'll go back to it in a few weeks I guess. In the mean time I'm breaking in a budget Nova 3 port, Not expecting as much performance as the Go, but dang it! It started right up! LMAO Not sore on Go, just frustrated. Especially since the 3 port Go in my buggy runs so good!

mmmm i think your rite i may not get an answer on that one ....

anyway i have a moded 3 port in my buggy it hauls ass i wish i had this motor for the nats.....:cry:..... but instead wasted alot of money on a big name dud motor for the nats in my buggy :lol:

i will redeem my self for the truggy nats in 7 weeks time plenty of time run in my new 7 port in my truggy :).......

i usualkly like to get at least 3 lt through the engine during break in befor i even decide to go racing with it seems to be working for me at the moment :nod:

mike your rite about the fuel tube brand i have been caught out befor when i changed brands same length and cc differant not alot but was dam close :eek: was at the state titles i thought i would replace everything for the final plug fuel tube what a shock when the car got checked at the end

Yeah, I'll get back to it if nothing else because I have a mental issue with it getting the best of me,lol. I got the nova they are selling at amainhobbies.com simply as a back up and the price. Most places sell it for 189.00 which is cheap, but they sell it for 149.00 and then I had a 25.00 on-line coupon so it was 124.00 AND free shipping. THAT is hard to pass up! Well see, sometimes you get a bargain and other times you just get what ya paid for.......

try an odonnell 77t plug,or an os-p3. set hsn to flush along with lsn. then turn hsn in 1/2 turn and lsn1 1/2 turns in. then fire it up. One other thing you may have an air leak around the hsn. Take it out if above fails and with it out blow through pressure line off of muffler. put rag under the top of hsn opening and see if any thing comes out. I had some rubber from the seal come out on mine. Got new seal put some soap around seal so it would twist with out tearing. engine ran fine. One last thing, check to make sure your head bolts are tight along with glow plug. To me it sounds like a weak plug,air leak fuel lines? It will be some thing easy. also our idle could be set to low causing you to set the lsn to rich,then setting hsn to lean. I've done it.

Did all that, and did find the hsn kinda chunky. blew it all out. have sealed the back of the motor and the carb, all parts of the carb. I will try a hotter plug when I put it back in, but right now I took the clutch and all and put it on the Nova to break it in. Un fortunately my free time to devote to figuring it out seems to be limited so I decided to break in the "N" motor so I can at least run/race this weekend and mess with Go when time permits. I have an extra clutch set up coming so I'll have complete setups on each motor. Easier switch out.

Well guys, GO engines its renewing the engine line for offroad, as soon as i get more info about them i will post it. As far as i've been told from the factory its new cooling head design, new materials in the inside of engine and new box. More detailed as soon as i get info about it :

http://i221.photobucket.com/albums/d...06NEOBUGGY.jpg

cya !

Those look sick! I can't wait to fire up my 7pt. I just got it today :nod: