Kyosho v-one rrr
#2131
Tech Master
iTrader: (42)
If anyone is looking for a RRR Worlds Kit I have a brand new package deal for sale. Check the link below. I have no time to race the kit.
RRR Wolrds For Sale
RRR Wolrds For Sale
#2132
Tech Adept
thats way too expensive.
Can get them cheaper from the shops son.
Can get them cheaper from the shops son.
#2133
Not the *worlds* kit, 450 is the cheapest you'll find it, at least in the places I've looked. If you're willing to buy two, now, that's the question!
rcfiend - you have PM!
rcfiend - you have PM!
#2134
Tech Adept
only ones a worlds kit.
#2135
Tech Rookie
wheels alignment
just finished fixing up my rrr, i notice that the wheel alignment direction for front and back looks like this from top down view...
\ / <----front
/ \ <----back
Is this alright/correct? If not how do i adjust it?
cheerz...
\ / <----front
/ \ <----back
Is this alright/correct? If not how do i adjust it?
cheerz...
#2136
Tech Adept
Yep. That's right. I just hope they're not that in equivalent angles.
Dave
Dave
#2137
Re: wheels alignment
Originally posted by ahleon
just finished fixing up my rrr, i notice that the wheel alignment direction for front and back looks like this from top down view...
\ / <----front
/ \ <----back
Is this alright/correct? If not how do i adjust it?
cheerz...
just finished fixing up my rrr, i notice that the wheel alignment direction for front and back looks like this from top down view...
\ / <----front
/ \ <----back
Is this alright/correct? If not how do i adjust it?
cheerz...
#2138
Tech Rookie
Thanks DaRollaRacer and buboy28.
#2139
Tech Elite
Thread Starter
iTrader: (2)
Join Date: Dec 2003
Location: Cebu City, Philippines and Ocala, Florida, USA
Posts: 3,840
Trader Rating: 2 (100%+)
Re: Re: wheels alignment
Originally posted by buboy28
your eyes are not deceiveing you thats the stock set-up in your manual front wheels are about 1 degree to 2 degrees toe-out rear wheels have a negative 1 to 2 degrees camber. adjust according to your driving style and track condition
your eyes are not deceiveing you thats the stock set-up in your manual front wheels are about 1 degree to 2 degrees toe-out rear wheels have a negative 1 to 2 degrees camber. adjust according to your driving style and track condition
#2140
Tech Regular
Join Date: Apr 2004
Location: batang kalokohan! ay kaloocan pala!!diretso ka lang,pag nasaksak ka! bahay na namin yung sa harap!
Posts: 328
Re: Re: Re: wheels alignment
Originally posted by doki_doki
i also noticed that while i was building the kit.... but now, i have changed my setting to suit my driving style and especially my engine... to much torque and top-end speed in the rbv12 5 ports turbo engine tuned by rody...
i also noticed that while i was building the kit.... but now, i have changed my setting to suit my driving style and especially my engine... to much torque and top-end speed in the rbv12 5 ports turbo engine tuned by rody...
I really miss the pinas pare.
I was thinking on goin home to phils. Next year and stay there for good.
#2141
Re: Re: Re: wheels alignment
Originally posted by doki_doki
i also noticed that while i was building the kit.... but now, i have changed my setting to suit my driving style and especially my engine... to much torque and top-end speed in the rbv12 5 ports turbo engine tuned by rody...
i also noticed that while i was building the kit.... but now, i have changed my setting to suit my driving style and especially my engine... to much torque and top-end speed in the rbv12 5 ports turbo engine tuned by rody...
#2142
Hi
I Was testing the v one rrr tonight and found the following.
1. The camber at the rear is too much and the 50000 oil is very hard for a tight track. Gonna change it to 3000 in R and 10000 in front.
2. the stock black springs are too hard and it makes my car skid.
3. i pushed the expo to 75% on the steering and 40% on throttle. will do more later as we progress.
4. Engine is purring nicely and as per website Sirio asks to do 10 tanks rich at half throttle. sometimes the car drags at that time we need to give in full throttle bursts to get the extra fuel out.
5. tyres are getting shaved off real quick due to the stock setup at the rear.
any setup tips for a sandy track.
More later.......
cheerzzz......
ZiiZO
I Was testing the v one rrr tonight and found the following.
1. The camber at the rear is too much and the 50000 oil is very hard for a tight track. Gonna change it to 3000 in R and 10000 in front.
2. the stock black springs are too hard and it makes my car skid.
3. i pushed the expo to 75% on the steering and 40% on throttle. will do more later as we progress.
4. Engine is purring nicely and as per website Sirio asks to do 10 tanks rich at half throttle. sometimes the car drags at that time we need to give in full throttle bursts to get the extra fuel out.
5. tyres are getting shaved off real quick due to the stock setup at the rear.
any setup tips for a sandy track.
More later.......
cheerzzz......
ZiiZO
#2143
Tech Rookie
RRR WCR
Finally, my RRR WCR is ready!
Check it out!!
P.S. Thanks SpeedsteRRR!!!
Check it out!!
P.S. Thanks SpeedsteRRR!!!
#2144
Nice
You should put the pipe lower as the fuel will build up
Try using the Skyline muffler mount
You should put the pipe lower as the fuel will build up
Try using the Skyline muffler mount
#2145
Tech Fanatic
4MM Shock Towers $9.99 free shipping worldwide
selling 4mm shock towers. they are $9.99 with free shipping. made of carbon fiber. if interested, send paypal to [email protected] (after the _ is a j in the paypal address) and email me to [email protected] your address and will ship in one day. attached is a copy of one. same exact hole locations as factory. also, thank you for the support of all the people who have purchased from me in the past. i do appreciate it. i am down to 10 left....
the 4mm is a lot stronger than the stock one.
the 4mm is a lot stronger than the stock one.