Great!!

There are no pump functions on any top end race cars. You just block the exhaust hole with your finger and put the car on the starter box to turn the engine over a couple times. Because you block the exhaust hole it creates more pressure in the tank to push the fuel towards the carby. Once the fuel has reached the carby then you connect your glow plug igniter and start her up . Other another way is you could just remove the fuel tubing that connects to the exhaust (at the exhaust end) and blow very softly into the fuel tank to push the fuel to the carby. Careful you don't suck otherwise you get to taste yummy nitro fuel

what is happening with this car guys? i have notice that except the ridiculous high price as a kit the spares and the options is expensive too. for example ,someone that wants to fix the diff problems need to pay some serious amount of money.just to make his car finish 2-3 races!for the price of 1 set arms you could buy 2 arms for rrr.what are they thinking??

vzw 427 upper arm stiffener

where does it go?

I believe it connects the left and right front upper arm hinge pins to increase the stiffness of the front end. It is suppose to give you a sharper steering characteristic. I have one on order and I will post a pic once I get it installed.

Nice...

Thanks mate!

Still interested?

Nikiforos never quit....keep walking...you nikiskar?

Waiting the correct day.

i hope it won t be too far away....i miss the races and the fun we used to have , till tsounami crisis begun

Anyone got problem with R4 front bumper???

I have broken 3rd one in 3 months.
How can I hardening the bumper or any replacement parts can solve this problem??

I have V1 RRR evo2. The front lower bumper can fit into chassis but front upper bumper can not screw to arm. So, maybe can not use this for R4

any one try VZ244 on R4 or V1 RRR ?? don't know how to put it on. Any photo???

I have Two RRR's with the VZ244 bumpers on them, no pics but they work just fine. It's also possible to fit the foam pad over the body posts with some triming. The posts fit about 20 mm further forward and the leading edge of the plastic "Blade" will require triming to fit under a TC bodies "Chin".

BTW, the VZ244's only cost about $6 and with or w/o a foam pad are easy to fit, just experiment with an old body to get it right, "Be Creative".

Smh......man i feel sorry for you r4 drivers, y'all spent all that money on some bull$&!t lol u could have got a much better car in the form of mug,nt1, cap, hell even hk1, goodluck
Ive seen a r4 with over $200 in upgrades!!! That's like $800 for a non winning tc.. ....smh