|
Re: Re: 710 CVD,s ????
Originally posted by BaxterC There is a very long and involved explanation as to why serpent did not make any... But think of it this way, the perfect car does not need hop-ups. Serpent have got HUDY spring steel dogbones and the PRO's use these, as well as HUDY spring steel drive 'cups'. What you can do is put a cable tie around the bone and the suspention arm above it, but make it loose enough to not bind, this stops the bones from flying an all directions. |
Re: Re: Re: Re: Re: New Parts
Originally posted by InitialD Thanks ! Where did you get the info from? Have they already trickled into the LHS yet? Will be looking forward to seeing them.:nod: I got it from a Serpent USA price sheet. |
Re: Re: 710 CVD,s ????
Originally posted by BaxterC What you can do is put a cable tie around the bone and the suspention arm above it, but make it loose enough to not bind, this stops the bones from flying an all directions. I wont lose my dogbones unless my car meets an experienced bass that knows how to chew up fishing wire. |
Originally posted by Herbie I hope the weather stays nice Mark. The forecast is not that good and I'll have to race sunday but I hope it stays dry during the weekend. |
Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Radio
Originally posted by Sow&Steady Yeap, considering I'm made and manufactured in the tropics, I was surprised that I was also "fried" this morning in London when it was only 12 DegC! :lol: Mind you, in a feeble effort to lose weight, I was trying to walk as fast as I can ... and OK, it wasn't very fast. :smile: |
Re
Originally posted by markp27 :cry: I've just seen the forecast :cry: :cry: I've had to sacrifice two days holiday this week for an f**ing software delivery :cry: and now it looks like rain at the weekend :cry: Hey guys, just road by and looked at the new track for Texas Biggie at RCrcnt. What a beautiful track. The way the track is set up it looks like a simi-permanent track, it looks like they can change the in-field. D@#! i wish i can race.:flaming: :cry: After going to the New Track I almost bought a Novarossi motor for 269, But i think i am going to wait for the 2106 and just order the 2105 to hold me. |
Re: Re: 710 CVD,s ????
Originally posted by JustRace I got a set from SouthWest RC. I tried them last week at the Twister Tire Challenge and they held up. I used them for practice, 5 qualifiers, and a 30 minute main. |
help
Hope someone can help me out here:
Just assembled the front portion of my 710, and noticed that the front ball diff is slightly loose...i can move it about 1mm side to side. Tried adjusting everything again, but still the same. And also, when i spin the mid pulley, the belt on the front ball diff pulley looks like its gonna fall off the side, its sitting too near the edge. Is this normal? Thanks. |
Re: Re: Re: 710 CVD,s ????
Originally posted by Car Breaker I think 3racing CVD should be ok, i have them on my G4 and i crash it many times :cry: , only one has slight bent :nod: , but their QC is just so so wish you luck buying them ( i buy 3 pair and only 2 pair can be use ):weird: |
Re: help
Originally posted by Devil666 Just assembled the front portion of my 710, and noticed that the front ball diff is slightly loose...i can move it about 1mm side to side. Tried adjusting everything again, but still the same. Did you check if the bearing and the eccentric cam were put in place properly? Left is for left and right for right side? I got mine mixed up (left to right and right to left) and that made the ball diff in the rear move sideways. Check that first. Originally posted by Devil666 And also, when i spin the mid pulley, the belt on the front ball diff pulley looks like its gonna fall off the side, its sitting too near the edge. Is this normal? |
Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Radio
Originally posted by Sow&Steady Was there last week, missed you at TT by a whisker on Sunday. Was drenched by the time I walked from the track to the car! :lol: Originally posted by Sow&Steady Anyway, shops seemed to whine about the slow cash-flow. You need to buymore stuff from ol' Thomas! |
Originally posted by PUNISHER Are these CVD's are made for front and rear or just fronts??:confused: :weird: :blush: |
Re: Re: Re: 710 CVD,s ????
Originally posted by KevinS I wont lose my dogbones unless my car meets an experienced bass that knows how to chew up fishing wire. |
Re: Re: help
Originally posted by InitialD I had this problem in the rear and someone noticed this for me when I was in Thailand ! :nod: Did you check if the bearing and the eccentric cam were put in place properly? Left is for left and right for right side? I got mine mixed up (left to right and right to left) and that made the ball diff in the rear move sideways. Check that first. |
Item you should be looking for,
SER-802235 Spacer Steering block & upright, Introducing these aluminium spacers for between the axle bearings in both the steering blocks and rear uprights. For use with the Serpent 710, these lightweight spacers help bring both bearings together as one stronger unit. This distributes the cornering pressure evenly between both bearings thus prolonging bearing life. |
| All times are GMT -7. It is currently 02:02 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.