Serpent 710
09-05-2004 | 04:54 AM
Tech Initiate
Joined: Apr 2004
Posts: 40
From: broughty ferry,Scotland
Markp27
Benarty on its longest track is the G.P. circuit at 223m long and is 4m wide i believe the lap record is 17.186 seconds
Becuase our track is made up of painted islands we have 23 possible track layouts clockwise and anti clockwise
Benarty on its longest track is the G.P. circuit at 223m long and is 4m wide i believe the lap record is 17.186 seconds
Becuase our track is made up of painted islands we have 23 possible track layouts clockwise and anti clockwise
09-05-2004 | 05:47 AM
Re: Re: Hubs & driveshafts
Originally posted by markp27
Seems you have Sow and myself confused with InitialD Certainly from the DVD you can see that Michael is using the hubs and Hudy spring steel driveshafts, but I don't have any more information than that 
Seems you have Sow and myself confused with InitialD Certainly from the DVD you can see that Michael is using the hubs and Hudy spring steel driveshafts, but I don't have any more information than that
Did you notice this before about Michaels car.
09-05-2004 | 06:12 AM
Tech Elite
Joined: Jan 2003
Posts: 4,069
From: Nuremberg, Germany
Originally posted by Denso#1
Markp27
Benarty on its longest track is the G.P. circuit at 223m long and is 4m wide i believe the lap record is 17.186 seconds
Becuase our track is made up of painted islands we have 23 possible track layouts clockwise and anti clockwise
Markp27
Benarty on its longest track is the G.P. circuit at 223m long and is 4m wide i believe the lap record is 17.186 seconds
Becuase our track is made up of painted islands we have 23 possible track layouts clockwise and anti clockwise
23!!!!! 
Not at all bad' You can certainly have lots of practice with different configuration. Not sure of the width of our track, but it must be about 3-4 meters.
09-05-2004 | 06:15 AM
Tech Elite
Joined: Jan 2003
Posts: 4,069
From: Nuremberg, Germany
Re: Re: Re: Hubs & driveshafts
Originally posted by B4
Sorry if indeed I am confused. I didn't think InitialD would have time to lift his head from his book explaining ring use.
Did you notice this before about Michaels car.
Sorry if indeed I am confused. I didn't think InitialD would have time to lift his head from his book explaining ring use.
Did you notice this before about Michaels car.
I'm sure I also speak for Sow, when I say that it is an honour to be mistaken for InitialD Regarding Michael's car I'm pretty sure it was D (
who else 
) who first spotted this.D is reacently not so quick on the forums, but it may well be due to RING abuse
09-05-2004 | 06:34 AM
Tech Prophet
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Originally posted by markp27
Certainly is, Denso - bit difficult to find if you don't speak German like InitialD
Certainly is, Denso - bit difficult to find if you don't speak German like InitialD
Originally posted by markp27
and some picture from a race - I even appear in these pics, but can't say which ones just in case InitialD has the RING!
and some picture from a race - I even appear in these pics, but can't say which ones just in case InitialD has the RING!
A tip !
Look for the oldest guy with the biggest beer belly.
09-05-2004 | 06:35 AM
Tech Prophet
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Originally posted by Sow&Steady
There ya go ... age is catching up with you too.
There ya go ... age is catching up with you too.
Originally posted by Sow&Steady
You would have been madder if you found that you could drive and no Tx.
You would have been madder if you found that you could drive and no Tx.
Yup. That would be even more cruel.
Originally posted by Sow&Steady
I think I have to either pull out my Max or get a JP-FX (if the-Border has them that is).
I think I have to either pull out my Max or get a JP-FX (if the-Border has them that is).
09-05-2004 | 06:37 AM
Tech Prophet
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Re: A picture which should have been on 3hobby
Originally posted by markp27
http://www.rctech.net/forum/attachme...postid=1077010
http://www.rctech.net/forum/attachme...postid=1077010
What are those nice extra 4 short antenas on each car?
For additional GSM 900 / 1800 dual band capability?
09-05-2004 | 06:38 AM
Tech Prophet
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Re: Hubs & driveshafts
Originally posted by B4
I tried my hubs and driveshafts from my Xray EVO 2 and the hubs fit perfectly but the driveshafts are to short.
I tried my hubs and driveshafts from my Xray EVO 2 and the hubs fit perfectly but the driveshafts are to short.
As expected. The ones on MS's 710 were prototypes. I think (and hope) they will come to full production soon.
Originally posted by B4
Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff.
Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff.
09-05-2004 | 06:40 AM
Tech Prophet
Joined: Feb 2002
Posts: 19,679
From: MORDOR
Re: Re: Re: Hubs & driveshafts
Originally posted by B4
I didn't think InitialD would have time to lift his head from his book explaining ring use.
I didn't think InitialD would have time to lift his head from his book explaining ring use.