Just wanted to rave about the Aluminum Inclined King Pin Spindle/12*Carrier LOSA1728, And the V2 setup with cut links. DIALED.......On Power and Off power was improved. On power steering is no joke on a well watered track.

I think it compliments the V2 setup perfectly. Now I just need to pick up the King Head rear hub, cause these bearings are killing me.

i cracked and got me some also :lol:

I just got the v2 rear tower....is anything else needed to use this?


also.......does the Ballistic nimh rx pack fit in Losi box?? I am used to Protek LI-fe speed and power in my K cars, but they would'nt fit in the losi box, im not hacking it up either.........what are you guys running for rx packs............Im open to suggestions, looking at the Ballistic nimh & Losi lipo and Losi regulator with switch right now.

will this fit properly without modification?
http://www.amainhobbies.com/product_...-Losi-8ight-20

i would personally go with my 5$ ebay specials. ;)

The ballistic pack will fit without the foam in and using the hump lid. The losi lipo fits perfectly with the foam and flat lid. The ballistic pack is also very heavy. I used to run AA packs like the ballistic one, and they worked well but nothing like the lipo does.:nod:

what are some ways to get more off power steering . im useing the 10* kingpin spindal and carrers.

Short ackerman, shorter rear camber links, thinner rear sway bar. Same 3 things I have recommended to others in this thread.;)

I cant get that dam flat lid on it with the stock foam. Are you using stock foam?

Maybe I will try again

Guys I am telling you the losi lipo why fix it if it aint broken??

lower your front ride height a little try 37-38mm

Yep stock foam. Connector is outside the box. I have a hole drilled in the side of the box so I can easily pull the connector through to get the battery out for charging. It's too damn hard to get it through the stock hole when the tray is in the car. I'll try to get some pics of how I have it setup.:nod:

Here's a pic. The pic isn't too great, but you can see how everything it routed.

I run the yeah racing lipos, they fit perfect with a flat lid and connector inside the box



my dad had two fail on him. plus yeah racing lipos range from 20-40 bucks, matters where you get them.

http://sphotos.ak.fbcdn.net/hphotos-..._3585929_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7642241_n.jpg

New V2 rear shock tower, Short rear links, No front swaybar and 5k front diff oil. I have no problem with slow speed steering now...........:tire::tire::tire: