|
Originally Posted by 8ight-racer
(Post 7791781)
Also the a arms, front and rear shocks, shock towers, etc. If you chassis is worn to what you say it is the entire truck is probably worn too, from replacing the outdrives and cvds all around, the diff cups wearing notches, o rings needing to be replaced, clutch springs/shoes need to be replaced, the plastics starting to wear and maybe even warp, for the price it will be to get it in good condition you will save money by just getting the 2.0T. Now we told you the same thing when the $150 rebate was out, but you ignored us so looks like your gonna have to pay $600 for one.
im was planning on, just getting the 2.0 t chassis not converting the whole truck. |
Originally Posted by 8ight-racer
(Post 7791781)
Also the a arms, front and rear shocks, shock towers, etc. If you chassis is worn to what you say it is the entire truck is probably worn too, from replacing the outdrives and cvds all around, the diff cups wearing notches, o rings needing to be replaced, clutch springs/shoes need to be replaced, the plastics starting to wear and maybe even warp, for the price it will be to get it in good condition you will save money by just getting the 2.0T. Now we told you the same thing when the $150 rebate was out, but you ignored us so looks like your gonna have to pay $600 for one.
im was planning on, just getting the 2.0 t chassis not converting the whole truck and a couple of 2.0 things that i need. no i already replaced, the center axles the i just need a new chassis thats all !!! everything else is already been replaced. i bought it used from a racer a year ago, and the chassis was already worn down but it had some life still not now though. |
Originally Posted by 8ight-racer
(Post 7791781)
Also the a arms, front and rear shocks, shock towers, etc. If you chassis is worn to what you say it is the entire truck is probably worn too, from replacing the outdrives and cvds all around, the diff cups wearing notches, o rings needing to be replaced, clutch springs/shoes need to be replaced, the plastics starting to wear and maybe even warp, for the price it will be to get it in good condition you will save money by just getting the 2.0T. Now we told you the same thing when the $150 rebate was out, but you ignored us so looks like your gonna have to pay $600 for one.
|
Originally Posted by JAMMINKRAZY
(Post 7791768)
Or sell the 1.0 and buy a 2.0.:lol: Dude you're just dumping $$$ into an outdated truck. There's no use.:lol:
|
Originally Posted by deadmancourt
(Post 7791903)
all you have done is talk down on the 1.0!....i bet you theres acouple of us on here that would put you to shame with our 1.0's....dont let any1 tell you that your truck is out dated!....buy the 2.0 t chassis and rear drive shaft! then buy a proline bulldog body for the mugen mbx-6t because the holes are not predrilled!....then take the rear body mounts and mount them 1 hole down and you are golden! you dont need all that other stuff! you can slowly upgrade your truck to the 2.0 for cheap off of ebay!...just buy piece by piece!.....your truck will be alot better with just the chassis!
|
Originally Posted by deadmancourt
(Post 7791903)
all you have done is talk down on the 1.0!....i bet you theres acouple of us on here that would put you to shame with our 1.0's....dont let any1 tell you that your truck is out dated!....buy the 2.0 t chassis and rear drive shaft! then buy a proline bulldog body for the mugen mbx-6t because the holes are not predrilled!....then take the rear body mounts and mount them 1 hole down and you are golden! you dont need all that other stuff! you can slowly upgrade your truck to the 2.0 for cheap off of ebay!...just buy piece by piece!.....your truck will be alot better with just the chassis!
|
MY BUDDY HAS THE 2.0 AND HE IS A NEWB SO I HAVE TO SHOW HIM HOW TO SETUP THE TRUCK AND DRIVE IT!:lol:.....I HAVE RAN HIS TRUCK AND SET IT UP MANY WAYS AND IT IS NOT THAT FAR SUPERIOR!....IT IS WIDER,WICH MEANS YOU NEED MORE ROOM TO PASS!....IT IS HEAVIER!...
|
Originally Posted by deadmancourt
(Post 7791903)
all you have done is talk down on the 1.0!....i bet you theres acouple of us on here that would put you to shame with our 1.0's....dont let any1 tell you that your truck is out dated!....buy the 2.0 t chassis and rear drive shaft! then buy a proline bulldog body for the mugen mbx-6t because the holes are not predrilled!....then take the rear body mounts and mount them 1 hole down and you are golden! you dont need all that other stuff! you can slowly upgrade your truck to the 2.0 for cheap off of ebay!...just buy piece by piece!.....your truck will be alot better with just the chassis!
thank you lol. |
Originally Posted by token
(Post 7791937)
THE TRUCK IS OUTDATED - 1.0 and 2.0 are totally different trucks. They handle totally different. They are wider, bigger and stronger. If you are a club racer then the 1.0 will be fine. But at a competition level, the 1.0 will not cut it. Hell one of the top guys in my class started the season with a 1.0 and he could not keep up. Sold that crap and got a 2.0 now hes back at the top of the class. Just suck it up and buy a 2.0 and be done with it. Unless the person driving the 1.0 is a world class driver, it wont cut it.
yea im just a club racer, i did race in a roar race i was kind of keeping up with the fast guys driving a 2.0 t but my engine was running like crap. but most of the time i race at a club level. |
Originally Posted by deadmancourt
(Post 7791961)
MY BUDDY HAS THE 2.0 AND HE IS A NEWB SO I HAVE TO SHOW HIM HOW TO SETUP THE TRUCK AND DRIVE IT!:lol:.....I HAVE RAN HIS TRUCK AND SET IT UP MANY WAYS AND IT IS NOT THAT FAR SUPERIOR!....IT IS WIDER,WICH MEANS YOU NEED MORE ROOM TO PASS!....IT IS HEAVIER!...
LOL the truck isn't any wider.:lol: More room to pass??? LMAO.:lol::lol: The arms are wider and the wheel offset is narrower. The truck is the same width. It is longer though.;) |
And it may be heavier, but it sure doesn't feel like it out on the track where it matters.;)
BTW this is the 8T 2.0 thread. We all have 2.0's and most of us had 1.0's. We KNOW the differences.;):lol: |
Originally Posted by JAMMINKRAZY
(Post 7792012)
And it may be heavier, but it sure doesn't feel like it out on the track where it matters.;)
BTW this is the 8T 2.0 thread. We all have 2.0's and most of us had 1.0's. We KNOW the differences.;):lol: |
Originally Posted by JAMMINKRAZY
(Post 7792012)
And it may be heavier, but it sure doesn't feel like it out on the track where it matters.;)
BTW this is the 8T 2.0 thread. We all have 2.0's and most of us had 1.0's. We KNOW the differences.;):lol: i know but the eight 1.0 t , tread knowbodys ever on it to answer yours questions at all ! like i said next year i going to get a new truck anyways. |
Thought it was funny when in the Horizon Hobbies preview vid what the dude says about the 8T2.0 RTR "It took me three years to get my version one to handle as good as this does out of the box!!" And that was the RTR...
|
Originally Posted by tc5 man
(Post 7792037)
i know but the eight 1.0 t , tread knowbodys ever on it to answer yours questions at all !
like i said next year i going to get a new truck anyways. tc5, I'd just run what you have for the rest of the year and get a 2.0 when you're ready. I've seen some REALLY worn out chassis' still run fine.;) |
| All times are GMT -7. It is currently 03:21 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.