|
Originally Posted by AJ DRAGON
(Post 15256409)
Hi
Any chance of seeing it without the body? Also did you encounter any problems using the extended chassis? I'm getting one of these trucks in a few months, and I am thinking of doing extended chassis mod. |
Originally Posted by petmotel
(Post 14993670)
I have the T-Bone tubular style front bumper on mine already, after checking out the new rear bumper, I HAD to have it, so it's on order. Very cool, and realistic appearing.
I'm painting up a Baja Bug body (I have several different bodies) and would have had to cut the engine detail portion of the body out using the stock rear bumper/support. The T-Bone bumpers are much flatter across bottom, I'm fairly confident this will fit with the full, intact body. Anybody with pictures of their MT with the new rear bumper? Jay |
My Build and recommendations
Hey guys, I've been following (slowly) along with the build thread and wanna give a big THANKS to all that give tips on builds.
My setup.. Monster Truggy. -MT410 chassis for now..soon M2C truggy chassis. -3.8 MX BAdlands and truggy size wheels - Tekin Gen 3 RX8 and 2000kv truggy motor -SMC 7200 4s lipo - Truggy Frt. & rear shock towers...I highly recommend this change up. Better stance (wider) at the camber links, beef'r than stock by far! -M2C Diff cups F,C,R...20k,20k,10k -Savox 1270 servo - All chassis supports -Aluminum shock caps, spring nut setup emulsion only. -Low pro truggy wing So much fun to drive and race! |
Originally Posted by fullpull
(Post 15272333)
Hey guys, I've been following (slowly) along with the build thread and wanna give a big THANKS to all that give tips on builds.
My setup.. Monster Truggy. -MT410 chassis for now..soon M2C truggy chassis. -3.8 MX BAdlands and truggy size wheels - Tekin Gen 3 RX8 and 2000kv truggy motor -SMC 7200 4s lipo - Truggy Frt. & rear shock towers...I highly recommend this change up. Better stance (wider) at the camber links, beef'r than stock by far! -M2C Diff cups F,C,R...20k,20k,10k -Savox 1270 servo - All chassis supports -Aluminum shock caps, spring nut setup emulsion only. -Low pro truggy wing So much fun to drive and race! |
Originally Posted by MaX-D
(Post 15272335)
Any pics? this is my kind of truck
My motor will be here this weekend. I had the Gen1 2000kv got it swapped out to the Gen3 2000kv after a issue arose with the Gen1 motor. I also run the Tekno Truggy body mod'ed (shortened) for the MT410 chassis. Basic flat white color with sicker on her. Thanks |
Here are pics
https://cimg5.ibsrv.net/gimg/www.rct...cb9a37b6be.jpg
Side view. https://cimg4.ibsrv.net/gimg/www.rct...1ea69ba361.jpg She's setting high when not loaded.. https://cimg8.ibsrv.net/gimg/www.rct...b4f1ab6bb5.jpg Where's the beef? Motor is going in tomorrow! https://cimg9.ibsrv.net/gimg/www.rct...f448f5ee95.jpg look at the difference in the towers! https://cimg0.ibsrv.net/gimg/www.rct...11ee919010.jpg Must change the tower! https://cimg2.ibsrv.net/gimg/www.rct...99bcec5eb7.jpg https://cimg6.ibsrv.net/gimg/www.rct...677461dca9.jpg Nothing fancy with paint yet. https://cimg1.ibsrv.net/gimg/www.rct...a19b008b89.jpg Aluminum emulsion caps getting modded.. Plastic ones are solid for now. |
NICE! I dig it.
|
Originally Posted by MaX-D
(Post 15272926)
NICE! I dig it.
|
some action vid !
|
I can't get the rear shock shock length to be 135mm when using the manual's setup. It's noot even near the 135mm. Any idea?
Also, is there any body that fits and goes low enough to reach the mudguards? I tried 2 of the ones that are supposedly compatible and they don't really fit or are clearly now high (low...) enough. |
nm.
|
What did you change to the stock shock setup (or other things like hub extensions or ...) to not damage the shocks on hard landings and avoid them becoming fully compressed before the chassis absorbs the hit? |
Originally Posted by Totallyosho
(Post 15309056)
I see you are running 0 offset giant tires. I'm trying the same but can't get chassis slap befor the shocks bottom out, which I'm sure is a recipe for disaster.
What did you change to the stock shock setup (or other things like hub extensions or ...) to not damage the shocks on hard landings and avoid them becoming fully compressed before the chassis absorbs the hit? i agree with you : if the chassis can't bottom out, something will break. but it seems that the mt410 did a good job so far, maybe thanks to the thick tire/ small rim who can compress a lot |
Originally Posted by werner sline
(Post 15309377)
it's not my video, it's "ABC kid" . he will reply to you in the comments of his video if you post you Q there.
i agree with you : if the chassis can't bottom out, something will break. but it seems that the mt410 did a good job so far, maybe thanks to the thick tire/ small rim who can compress a lot means you're limited to them (discontinued), badlands (out of stock atm), most Traxxas e-revo tires (ugh) and not much else I can find if you don't want to risk destroying your shocks. nice. Should have bought an Outcast. |
Originally Posted by Totallyosho
(Post 15312879)
For future reference: there's no chassis slap possible with anything bigger than the Shockwaves.
means you're limited to them (discontinued), badlands (out of stock atm), most Traxxas e-revo tires (ugh) and not much else I can find if you don't want to risk destroying your shocks. nice. Should have bought an Outcast. |
| All times are GMT -7. It is currently 04:10 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.