|
Originally Posted by or8ital
(Post 10391725)
Does anyone know if the xray rear body mounts fit the TC6? Thanks.
|
Originally Posted by VAzRACER
(Post 10391890)
No but if you cut off the pin and drill your own hole for a second screw they work. Thats what I did.
|
Hey Rick,
Any reason you still chose to use the tc5/tc6 sway bars vs. the 6.1 bars? |
Thumbs up....TC6.1 on Foam tires
Not many foam tires races currently.......but, alas, doing some experiments on TC6.1 set up....the car can be dialed in to run Foam Tires on carpet very well :)
|
Originally Posted by RAL
(Post 10390478)
Rick will the Team Bomber ones fit for the BD5?
http://www.rc-race-and-drift-japan.c...oducts_id=2661 Front will fit. Rear not, it is 1 tooth too short! Regards! michal |
When using cleaning putty in the front gear diff how much is used? Any particular brand needed?
|
Originally Posted by or8ital
(Post 10394322)
When using cleaning putty in the front gear diff how much is used? Any particular brand needed?
It doesn't cange during the run when it gets warmer! The cleaning puty gets softer during the run and changes the handling characteristics of the car... Regards |
Originally Posted by Geberit
(Post 10394346)
I use this one: http://www.fast-webshop.com/tonispor...Putty-Net-40-g
It doesn't cange during the run when it gets warmer! The cleaning puty gets softer during the run and changes the handling characteristics of the car... Regards |
Originally Posted by pressure
(Post 10391480)
Mike Haynes National Champion runs his TC6.1 for the first time at 360 V2 raceway in New Roc NYC
http://youtu.be/JOnqnxh-3ok |
Originally Posted by JamesL_71
(Post 10395296)
Is Haynes running for AE now?
|
Originally Posted by hanulec
(Post 10395365)
Just check him out at the end of video in his AE shirt...
And just when he was getting comfortable with the Top Rebel 12s @ the Snowbirds... |
James / FJ
Yes i am now on team AE, and very happy to be here! Last week was my first outing with the tc6.1 and it is off to a great start;) I should have my 12th scale built in the next week or so, in sedan mode right now. For anyone who is wondering, the setup Kevin posted from Snowbirds is a great place to start, dialed in from the first pack, only needed minor tweaks to suite my local track (360 in New Rochelle). Pressure...i like the video, looks like i need a diet tho:blush: |
Originally Posted by Mike Haynes
(Post 10395497)
James / FJ
Yes i am now on team AE, and very happy to be here! Last week was my first outing with the tc6.1 and it is off to a great start;) I should have my 12th scale built in the next week or so, in sedan mode right now. For anyone who is wondering, the setup Kevin posted from Snowbirds is a great place to start, dialed in from the first pack, only needed minor tweaks to suite my local track (360 in New Rochelle). Pressure...i like the video, looks like i need a diet tho:blush: Mike |
Is anyone using the 6.1 arms with the Dial-a-grip blocks?
|
Originally Posted by JoelV
(Post 10392801)
Hey Rick,
Any reason you still chose to use the tc5/tc6 sway bars vs. the 6.1 bars? |
| All times are GMT -7. It is currently 04:59 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.