|
ncie find!
|
Originally posted by fraz Pics from the Nuremburg Toy Fair: http://www.radiocontrol.gr/galleries...erg2005273.htm http://www.radiocontrol.gr/galleries...erg2005274.htm http://www.radiocontrol.gr/galleries...erg2005278.htm Here's the saucy new tb-02r that looks impressive. http://www.radiocontrol.gr/galleries...erg2005277.htm I know this is a bit off topic, so I'll flame myself:flaming: :flaming: :flaming: |
Originally posted by syntex1 try running stiffer rear oil 40front 45rear 0r 50rear should help also try running some anti dive in the front |
Originally posted by patrick The problem is not the spur hitting the top deck, but hitting the ground. I tried an 81 tooth spur, but it stuck out past the bottom of the chassis! I think 78 or 79 would be the largest you would want to use. |
Hehe sorry to cut off the last conversation you guys were havin but just wanted to drop in to say i've officially got myself an evo IV tho its quite late i reckon but i dun give a rats turd cos i'm goin to start on it tmr woho!!!:D :sneaky:
|
Hey, who's this?? Its awesome to see the number of Evos growing in Australia, especially in Melbourne!!! Now it seems that they are becoming a bit more common which is great. Gotta fly the flag for Evo IV. It's a great car, especially in Stock trim. I've only just started doing modified after doing well in Stock so I can't totally comment about its Modified performance because I think that its more motor and car setup that I'm missing rather then it being the actual car's fault.
Anyway, great to hear about it. Check out www.rcracer.com.au as you can find a lot of info about us Melbourne, Australia runners there with clubs, etc pages there too. Plus.... most Evo IV owners seem to be there, at least the guys from Melbourne are. :D :D |
Hey Alonso, you might have to just slightly bevel the top deck with a 78 tooth spur.
|
Tamiya America TRF link...
so is this new?
http://www.tamiyausa.com/articles/f...p?article-id=79 ...or, am I such a lazy ass that I choose not to read the previous pages that might have mentioned the TA site updates... |
Re: Tamiya America TRF link...
Originally posted by madjack so is this new? http://www.tamiyausa.com/articles/f...p?article-id=79 ...or, am I such a lazy ass that I choose not to read the previous pages that might have mentioned the TA site updates... http://www.tamiyausa.com/articles/fe...?article-id=79 |
hey simon,
won 3 straight club race here in our place. i was in stock novice class and tqd and won! the evo is proving to be a great car. will run mod nxt month ant will keep you posted. |
Great to hear buddy!!
Patrick, when you say bevel, do you mean shave a bit of the top deck for it to fit?? |
28mm foam on front LW suspension solution!!!!!!!!!!!!!
1 Attachment(s)
I special ordered some Square steering knuckles for the stock 415 and come to find out that it shorter in height,used tube flanges and shim for installtion, so I was messing around and guess what the stock 415 steering knuckle will fit the LW suspension caster block
on the left is the full stock set-up and on the right is the combination of the two. No modification are need if you order the Square Steering knuckle it come with everything you need |
Re: 28mm foam on front LW suspension solution!!!!!!!!!!!!!
1 Attachment(s)
Originally posted by dawgmeat I special ordered some Square steering knuckles for the stock 415 and come to find out that it shorter in height,used tube flanges and shim for installtion, so I was messing around and guess what the stock 415 steering knuckle will fit the LW suspension caster block on the left is the full stock set-up and on the right is the combination of the two. No modification are need if you order the Square Steering knuckle it come with everything you need |
Re: Re: 28mm foam on front LW suspension solution!!!!!!!!!!!!!
1 Attachment(s)
Originally posted by dawgmeat |
Does anyone know if the Evo4 MS is going to come with the extra suspension mounts? I'm going to pre-order mine in a couple of days and was wondering if I need to plan on ordering the mounts as well.
Also, what are the must have extra parts for the Evo. I'm not sure about parts supply in my area, and I don't want to get caught short handed. |
| All times are GMT -7. It is currently 12:05 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.