dbmartin

iTrader: (11)

Here is my setup I ran in Tampa for the last state race, This will be my starting point for the state race in a couple of weeks at superior. I run a mazda 6 speed and 4.5 motor, very agressive steering, but a very fast setup. I could not save the pdf file, so I took some pics of the setup sheet for you to look at.

BobbyS

iTrader: (1)

Hey! I actually have those! I didn't tear the car down tonight, but I'll be taking a look this weekend... Thanks!

treemagnet

iTrader: (17)

Is there any here 540 (silver can) TC5 racers here? im just starting in this class of racing. just wanna bought gearing these motors. im running 26 pinnion with 84 spur and my ratio is 6.46. now is that my FDR?? and what is rollout ppl keep talking bout??

thanks i know there are a few questions there
treemagnet

PW

Sherwin's car was really good last month at Superior with this setup

artwork

iTrader: (88)

Just wanted to post some additional information on the Integy TC5 parts.

So I ordered a few things to see how they looked, and I am happy to say that they are really nice. I ordered the aluminum 4* c-hubs the 0* rear hubs.

My quick review:

Anodizing looks nice...etched 4* and integy logo; no left/right designation on them

Machining looks nice and seems to very pretty accurate. The bearing slots in the rear hubs are pretty tight, absolutely no play and the axle fits well and does not appear to be miss aligned in any way. The hubs seem to be 0*, but I will be putting them on the car so that I can tell for sure.

Overall I am impressed, and for the price they are hard to beat.

Weights:
plastic 4* c-hub = 3 grams
Integy 4* c-hub = 4 grams

plastic 0* rear hubs = 3 grams
Integy 0*? rear hubs = 4 grams


No, I do not work for Integy, but these seem to be pretty nice for the money.

AeRacer805

Is anyone using a futaba 9551 or 9550 for their steering servo??? What spacer did u use when u mounted the servo.

BobbyS

iTrader: (1)

Thanks for the review, would like to know if the rear hubs are 0* or 1* if you can tell. I have my car dialed with 6* c-blocks and only wish that they'd made those too...

baf1

iTrader: (1)

.

Sean B.

iTrader: (13)

Diggity Designs makes them.
Excellent quality for a good price.
http://www.diggitydesigns.com/D3_OnR...iated_TC5.html

SteveJa

iTrader: (17)

the manual says the wheel bearings are 6 x 10 x 4.... but on some full bearing kits I look at show them as 6 x 10 x 3 ?


so what are they ? 6x10x4 or 6x10x3 ?


thanks

SteveJa

iTrader: (17)

both boca and acer are showing these as 6x10x3.......and the manual as 6x10x4...... I am wanting to order extra from avid, but they only have 6x10x3.. they dont list a 6x10x4 ?


thanks

artwork

iTrader: (88)

6x10x3...check out avid for a good price on them. I ordered 10 sets before I went to Vegas.

Rommel

iTrader: (3)

Nice review artwork so I just ordered some rear hubs, steering blocks and servo saver

SteveJa

iTrader: (17)

I was just about to place my order with avid.... then when I was trying to find the 6x10x4 (as per the manual) I could not find them.......

looks like I will be good to go.....


thanks

artwork

iTrader: (88)

Rear hubs are 0* after fitting them on the car.

Some pics too...