Originally Posted by vito (Post 11671051)

so its us sizes?

Originally Posted by Wild Cherry (Post 11670239)

Med high traction clay conditions

Front End
-1 camber
Camber link = 2 .030 spacers under #1 tower stud mount , A hole on caster block
30 degree block
Carbon Front arms
12mm shock , White spring , 1.7 piston , 37.5W oil, 3 internal limiter
Shock location = inside on tower & outside on arm

Rear End
-1 camber
C-hub , shaved Carbon U brace , 0 spacer under U brace camber stud, B hole on Carbon brace ....
Hub mounted in middle of arm
Carbon rear arm, 2 degree anti squat
12mm shock , white spring , 1.7 piston,35w oil , 2 internal limiters...
Shock location = inside on tower & inside on arm


AVID Triad Slipper

Electronics
Lrp Flow ESC, Reedy 8.5 sonic, Xp DS 1015 servo, Reedy 25 C Wolf Pack
JConcepts Body
JConcept Bar Codes Rear insert = AKA red


Track conditions
Med high grip , Blue groove ,smooth clay, med jumps .

Recommend

Black Ae front spring & Ae Green rear on med grip surfaces...

Traction Sauce = Trinity Sticky Finger's

Originally Posted by Cridd (Post 11671495)

Question, why a 25c battery and not a 90c Orion?

Originally Posted by aeRayls (Post 11671504)

Much much smoother power delivery in modified. I only run the 25c packs shorty and full.

Originally Posted by Venom1836 (Post 11672048)

Yes.

25C Wolfpacks are great, not too expensive and work great. Mine take in 5500 MAH on a full charge.

Perfect with Reedy Sonic 7.5 in my buggy along with a LRP ESC.

Originally Posted by Cridd (Post 11672751)

How about stock class?

Originally Posted by ilanstylz (Post 11672778)

Stock class you don't want to use anything IMO lower then a 50c rating...... A stock blinky class you will def. notice the difference between a 25c and 50c lipo. I personally run nothing lower then a 60c and have a few at 70c...... So it def. matters in stock what lipo's you run. Which is why I also run shorties only because they are lighter then stick packs with same ratings........

Originally Posted by 07Forester (Post 11672765)

Adding U-brace c-hub mod.

If anyone has pictures of the rear hub grub screw mod, send them to me?

Originally Posted by vicdamone11 (Post 11672900)

Nice, i like that i dont have to drop $400 bucks next winter to get a fresh car.
My guess is $269.99, my only complaint is the the yellow wheels and bulldog is fugly..imo

Does this mean the old thread is dead???

Originally Posted by lala4fire (Post 11672929)

Sorry, I'm super confused....I'm reading about matric and standard hardware like its something new that has come out. I currently race a FT sc10 and have a b4.2 on order. Did the hardware sizing change and now I have to buy new hex drivers and nut drivers? Thanks for setting my mind at ease.