TLR 22SCT Thread (Check First Page for FAQ & INFO)
Tech Prophet
iTrader: (34)
Hello,
I want to know more about Team Losi Racing 22 SCT 2WD.
1. Is this car easy to drive for asphalt on road racing ? In my country, on-road short course racing is becoming more popular. Racers usually piloting 4wd team losi scte and tekno racing 4wd. I want to use 22 SCT 2WD for simplicity reason. Am I going to be disappointed chosing 2WD truck ?
2. As part of on-road SC racing regulations in here ..... Racers are required to use 1/8 On Road GT Tires. Usually they use Sweep Racing tires. Therefore , 17mm Hex Adapter must be use for aforementioned tires. Is this fit ? MIP 17mm Hex Adapter Kit, Traxxas Slash 2wd #10114.
3. Do u have any suspension setup suggestions for asphalt racing ? Should I use middle or rear motor mount location ? I prefer to have stable rear end rather than fish tailing rear end.
Thank you for enlightening me.
I want to know more about Team Losi Racing 22 SCT 2WD.
1. Is this car easy to drive for asphalt on road racing ? In my country, on-road short course racing is becoming more popular. Racers usually piloting 4wd team losi scte and tekno racing 4wd. I want to use 22 SCT 2WD for simplicity reason. Am I going to be disappointed chosing 2WD truck ?
2. As part of on-road SC racing regulations in here ..... Racers are required to use 1/8 On Road GT Tires. Usually they use Sweep Racing tires. Therefore , 17mm Hex Adapter must be use for aforementioned tires. Is this fit ? MIP 17mm Hex Adapter Kit, Traxxas Slash 2wd #10114.
3. Do u have any suspension setup suggestions for asphalt racing ? Should I use middle or rear motor mount location ? I prefer to have stable rear end rather than fish tailing rear end.
Thank you for enlightening me.
http://prolineracing.com/street-fighter/
JC has a similar tire as well
http://jconcepts.net/shop/glocs-blac...2-sct-premount
If the track is prepared Panther Makes slicks!
http://www.panthertires.com/store/in...&product_id=68
Tech Champion
iTrader: (136)
I have used the Proline Street Fighter in parking lot racing and they work very well. I have used the GLoc tread pattern on tires for the 4WD Stampede and they were very good.
Will sc10 hex wheels fit sorry if its a dumb question have not had a losi in about 10 years
Tech Regular
Tech Master
iTrader: (21)
Tech Elite
iTrader: (67)
how tight are people setting their slippers? (how mm from flush nut)
Tech Elite
iTrader: (67)
Whats the best body for the sct thats the smallest some body seem to be so much wider than some.
Tech Master
iTrader: (24)
got a issue with the left rear drive shaft it keeps coming apart and blowing out after only 2 to 6 mins even tried ae ones only lasted 7 mins even thread lock and heat tube over the pin still flys apart what is going on here.
Tech Elite
iTrader: (125)
You could put a small notch in the pin where the set screw sets using a dremel. Clean all the parts especially the grub screw. Use good Loctite. I never had issues when I ran mine.
Tech Regular
iTrader: (4)
Has anyone been having binding issues with there Exotek bellcrank upgrade? I have a Spektrum 6040 and at full right turn, it binds. I get maybe 10% more left turn than right turn. I will take some pics when I get home but I need to know if anyone else has every experienced this issue. The actual TLR servo horn binds on the link that goes between the servo and the bellcrank. In Exotek’s directions, it shows using the new steering link off the TLR 22 2.0 (similar to team associated’s on the B5), but I cant buy just that link because TLR blows and only sells stuff as massive kits (unlink AE where you can buy just spring cups and don’t need to buy half the da*n shock all over again).
Any help would be appreciated.
Any help would be appreciated.
Tech Master
iTrader: (24)
Has anyone been having binding issues with there Exotek bellcrank upgrade? I have a Spektrum 6040 and at full right turn, it binds. I get maybe 10% more left turn than right turn. I will take some pics when I get home but I need to know if anyone else has every experienced this issue. The actual TLR servo horn binds on the link that goes between the servo and the bellcrank. In Exotek’s directions, it shows using the new steering link off the TLR 22 2.0 (similar to team associated’s on the B5), but I cant buy just that link because TLR blows and only sells stuff as massive kits (unlink AE where you can buy just spring cups and don’t need to buy half the da*n shock all over again).
Any help would be appreciated.
Any help would be appreciated.
it shows that you'll need to install the servo from behind:
https://app.box.com/s/ojr0u3mj9ehez4b32tl9
Tech Regular
iTrader: (31)
Has anyone been having binding issues with there Exotek bellcrank upgrade? I have a Spektrum 6040 and at full right turn, it binds. I get maybe 10% more left turn than right turn. I will take some pics when I get home but I need to know if anyone else has every experienced this issue. The actual TLR servo horn binds on the link that goes between the servo and the bellcrank. In Exotek’s directions, it shows using the new steering link off the TLR 22 2.0 (similar to team associated’s on the B5), but I cant buy just that link because TLR blows and only sells stuff as massive kits (unlink AE where you can buy just spring cups and don’t need to buy half the da*n shock all over again).
Any help would be appreciated.
Any help would be appreciated.
https://app.box.com/s/mxr1jf1khvj77g23allb