|
Originally Posted by mytdck1
(Post 11788180)
do i buy a kit and spend another-$150-200 on upgrades
|
|
Hey guys ..
Got to see Chris's Sc10 close up , lots of stuff for you guys to drool about. I will take the time tomorrow and bring the digital and take the pics... Also the details with set-up , ect .... |
AE 3300kv motor = to what in a "turn" motor?
I have a stock AE 3300kv motor and will upgrade the motor and ESC soon.
What would be an equivalent 2 pole half turn motor regarding power? TIA |
Originally Posted by shagnat
(Post 11789143)
I have a stock AE 3300kv motor and will upgrade the motor and ESC soon.
What would be an equivalent 2 pole half turn motor regarding power? TIA |
Originally Posted by SinCityMedic
(Post 11789788)
10.5
|
Originally Posted by Wild Cherry
(Post 11789067)
Hey guys ..
Got to see Chris's Sc10 close up , lots of stuff for you guys to drool about. I will take the time tomorrow and bring the digital and take the pics... Also the details with set-up , ect .... |
Originally Posted by longlivethe3
(Post 11790375)
Thanks again, owe you a beer.
That's why I'm bringing the camera..:batman: |
My front hubs and caster blocks are getting real sloppy. Are there replacement parts that tighten it up, or just buy new? I am using FT parts on an RS A arm, RS steering assy.
|
new
Originally Posted by platgof
(Post 11792277)
My front hubs and caster blocks are getting real sloppy. Are there replacement parts that tighten it up, or just buy new? I am using FT parts on an RS A arm, RS steering assy.
|
Originally Posted by Wildcat1971
(Post 11785352)
Some guys run the caliburs here. But they are mostly the novice guys. The novice guys like them, no idea what. All of the faster guys run gridirons. IMO the proline tires wear out fast... all of them. But their foam is softer and works nice outdoors. I tried some blockages and they felt pretty good.
|
Originally Posted by Wild Cherry
(Post 11790396)
Getting ready to go to track . You will be busy with Dremel grinding after you see this mod ..
That's why I'm bringing the camera..:batman: |
Originally Posted by mytdck1
(Post 11788180)
so, this is my first season of racing and im having a blast, currently driving an sc10 4x4ft. love it, but 2wd is coming on strong. what are the bare minimum i need to do if i were to buy an sc10? i know hexes are a must-not into having special fr/ rr tires. are big bores that valuable? vts? steering link? do i buy a kit and spend another-$150-200 on upgrades, or wait and hope that a .2 version is coming out that addresses all of these issues? also, what would be a good motor. our track was just changed. smallish and very technical. dog-leg straight and technical infield. any guidance is greatly accepted!
|
Originally Posted by J_Bone
(Post 11793470)
Wait for the .2..... You will regret it if you don't.
|
I just bought a kit last night, was gonna wait for the .2, but I figured by the time us mortals could get one, indoor season would be about over and I want to play now. New kit releases are nothing new in this hobby, just do what you want, because they will ALWAYS come out with something new.
Travis |
| All times are GMT -7. It is currently 05:42 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.