Originally Posted by MantisWorx

REALLY man????? you do realize that this is not my first rodeo, you need to back up off of cody and Ryans nutz I mean seriously how in the HELL can their setup work on every track and with every driver. I just told you that EVERY SC10 at the track yesterday had the same problem and none of us had the same setup in fact one of them had Ryans setup so what now? I was over a second quicker than any other SC10 there but i guess that means nothing either right. Maybe on your small indoor little jump track that setup may work but not on a big boy track. Do you ever read your own post before you submit them?

Originally Posted by Wild Cherry

Your the one who's crying about the jumps , right?

Just giving U good advise .






OYeah , not my set-up , Its the teams...


So why not use the worlds best drivers set-up for the Sc10 4x4 ?

Your the one that's "nutz" if yeah haven't yet ...




Take a look at Trcr sometimes , Scott Brown(AeFactory Driver) builds layouts that will challenge the best driver & yes we have mass jumps on the layout we running on right now ...

Also don't assume I have no experience on outdoor or 1/8th scale layouts with 60 ft jumps ....
Cus I can fly like a eagle on those big fella...



Hope you figure out your ride ...

Originally Posted by Vegatron75

I've seen plenty of Mantix/RCSHOX videos.

Not sure If I remember seeing any WILD CHERRY videos.

WC, Please post a video of you running at your local track. I'd like to see how well your truck works. Thanks.

Originally Posted by Wild Cherry

Going to Ptown next week end for the Pacific N/w Shoot-Out , a "big" event, but PTown is a way small track baby ....

I'm in the points already , 22 4x4's last race ....

We had around 16 4x4's tonight @Trcr for Sc Saturday , no Tq , got the win though...
O-man !....


Should of seen my truck tonight , never faster ...


Scott Brown even has me rebuilding his Sc4x4 tomorrow ..

Originally Posted by CoyoteSlash

Originally Posted by marksp

I just put the Exotek inline saddle kit in my Exotek LCG chassis and I'm sad to share that there is no way to fit the RX8, short of hacking the the RX8, modding the Exotek saddle kit, or both.

It's got my wondering if the following would work:

- flip the Exotek bracket around so that the "skinny" tab is towards the rear of the truck. (+1 mm)
- grind the "fat" tabs completely off and use the front of the LCG chassis as the battery stop (+5 mm)
- relocate the screw holes accordingly.

This nets out to 6 mm of additional space which might just be enough to squeeze the RX8 in.

...or I might just have to wait for the AE FT inline bracket, which will be my 4th attempt to work saddles with the RX8 without hacking my goods.

Originally Posted by MantisWorx

Where do i begin! Its pretty much been a disastrous weekend, i seem to always have stupid crap happen to me throughout big race weekends. I know its coming and pretty much expect it but yesterday drained my soul!! So because of where i live i wanted to leave at 5:30 to avoid monster traffic as my car is pretty much a race car with a liscense plate! (585whp STI!!) We were told the track would be open for practice at 8am. so i get to the track around 6:45 as planned, gates opened at 8, I unload everything and get on the track. ran about 10 laps with my Ebuggy and SC and the the RD kicks us off the track and tells us it wont be open until noon???? This was a little frustrating but since i at least got a few laps down on a very slick track i needed to make some changes anyway.

WHAT A DAY

Originally Posted by marksp

I just put the Exotek inline saddle kit in my Exotek LCG chassis and I'm sad to share that there is no way to fit the RX8, short of hacking the the RX8, modding the Exotek saddle kit, or both.

It's got my wondering if the following would work:

- flip the Exotek bracket around so that the "skinny" tab is towards the rear of the truck. (+1 mm)
- grind the "fat" tabs completely off and use the front of the LCG chassis as the battery stop (+5 mm)
- relocate the screw holes accordingly.

This nets out to 6 mm of additional space which might just be enough to squeeze the RX8 in.

...or I might just have to wait for the AE FT inline bracket, which will be my 4th attempt to work saddles with the RX8 without hacking my goods.

Originally Posted by F_ME

You are running the Exotek chassis as well?

I too noticed that it is harder to make inflight adjustments as compared to the SCTE. Tried dialing in more brake but still not enough when the nose pitches up too far.