Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
I would say stick with the 15. That should be perfectly fine. I ran a 15T on mine with the 3800 for over a year and it was great. Now I'm running the Viper 4500 and I'm using a 14T. Temps were always good, and top end was great.
What servo do you run in your SCTE? I'm getting ready to order one for my other SCTE that I'm rebuilding.
Tech Master
iTrader: (55)
9100T is a great servo but a little slow , I use the Ace/AE DS1015 myself .
Any servo with at least 180 oz torque and .15 or faster transit speed is what you are looking for .
Any servo with at least 180 oz torque and .15 or faster transit speed is what you are looking for .
Tech Addict
iTrader: (8)
I like the Hitec 7955-TG also.
I'm using this servo in one of my SCTE's now and its been great until the last few times I've run it. My truck has been losing its on power steering after about 6 minutes on a pack? Have no idea what's going on. After about 6 or 7 minutes of running I have to let off the throttle to get the truck to turn.
Tech Regular
iTrader: (25)
hey guys,
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
hey guys,
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
Tech Addict
iTrader: (8)
hey guys,
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
Tech Regular
iTrader: (25)
Tech Addict
iTrader: (8)
Tech Regular
iTrader: (25)
ok maybe ill go for one of those but man are they pricy! plus add in the rx8 so thats like $350... im going to be so broke after i build up this truck!
Tech Master
iTrader: (4)
hey guys,
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
im looking into the SCTE because i like the 1/8 scale design. my losi truggy i great and very durable so i figured i would try the SCTE because its basically a scaled down 8ight. the only thing im worried about is getting a powerful enough motor because i like to run overkill motors and esc's so i dont have to worry about it being to slow or overheating. so what im asking is what motor is a motor i can run on anything from an 1/8 outdoor track to the indoor track turned down. i was looking at the tekins but i dont know which one to get?
im not a noob but i havent been staying up to date with the pro 4 class so any help is appreciated.
thanks,
dan
Its extremely smooth, fast, and runtimes are good. At the price hard to beat
Tech Master
iTrader: (4)