Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
5 Attachment(s)
Everything you need to know about your Losi Ten SCTe 4x4....
http://www.globalownage.com/losi/tenscte.png Truck Manual http://go.redirectingat.com/?id=42X1...%26p%3D8516085 http://www.globalownage.com/losi/prod_spec.png Type:4WD Short Course Rolling Chassis http://www.globalownage.com/losi/motor_gearing.pngScale: 1/10 Length: 21.34 in (524mm) Width: 11.65 in (295.8mm) Wheelbase: 13.15 in (334mm) Weight: 6.75 lb (3.06 kg) Fully loaded ready to race Tire Type : Eclipse SCT Kit/RTR: Rolling Chassis Shock Type: Aluminum, Coil-over, oil-filled Body Clear Polycarbonate SCT Functional mud flaps with Losi logo Oversized 12mm anodized, threaded shocks 12mm wheel hexes Secure battery straps Battery tray accepts multiple types and sizes of packs Heavy-duty, 4mm tie rods with captured ends Beadlock-style SCT wheels with rings Front and rear sway bars included Eclipse™ Short Course truck tires Secure radio box to protect the receiver Simple adjust, aluminum motor mount Lightweight black anodized aluminum chassis Needed to Complete 550-sized Brushless System (Motor and ESC) 1/10-scale Steering Servo 2S LiPo Battery Pack and Charger 2-channel Radio System Polycarbonate Paint 550 Motors Tekin Redline SC4X 4.5-5.5 Novak Ballistic 550 4.5-6.5T Novak HV 4.5-5.5T Fantom Fusion 1 & 2 550’s Speed Passion V10 3.5R-5.5R Speed Passion V2 5.5R Team EPIC Monster Horsepower 550 Team Epic 4x4 Short Course Monster Horsepower 4.5t LRP X12L Short Course Sensored Brushless 550 Motor Orion Vortex 10 2800kv (best on 3S) Castle Creations 1415 2400kv 1/8th Scale Motors Tekin T8 2650 - Requires slight modification to plastic spacer under the motor mount. 540 Motors Castle Creations 1410 1Y 3800kv 4 Pole Gearing recommendations with 40T spur (2 Pole motors) http://www.globalownage.com/losi/diff_shocks.png4.5 550's - 13-16T pinion 5.5 550's - 14-18T pinion 6.5 550's ?? Castle/Neu 4 Pole motors Castle 3800kv - 13-17T pinion Castle 2400kv - 17-20T pinion 3MM Mod 1 Bore Pinions for CC 1415 & 1410 motors http://www.amainhobbies.com/advanced...ds=3mm&x=0&y=0 Recommended ESC’s Viper VTX10R (3S capable) Tekin RX8 (Using current limiting (90-80%) can help on motor temps) Mamba Max Pro Mamba Monster Novak Kinetics LRP SPX8 LRP Sphere Comp TC Spec w/fan Speed Passion Silver Arrow V2 Stock shock oil f/r - 30w from the factory. Stock Diff's come filled with grease. When disassembling the diff housings, be careful when removing the screws. They have been known to be in tight and require a 1/16th sized hex. http://www.globalownage.com/losi/screws_turnbuckles.pngShock Piston sizes: #1 0.95mm | #2 1.00mm |#3 1.05mm | #4 1.10mm | #5 1.15mm Diff housing screw size (for people who have stripped the screws and want another option) Four screws - 2.5mm 45 pitch 10mm. HPI has some screws that work part# Z449 , they are M2.5x12mm 2mm longer than stock but the holes are deep enough in the diff housings. Diff fluid starting points. Indoor blue groove 5-7-3 (Front/Center/Rear) Indoor blue groove 5-5-3 (Front/Center/Rear) Outdoor med bite 3-3-2 (Front/Center/Rear) Lunsford SCTE Titanium Turnbuckle kit http://www.globalownage.com/losi/media.pnghttp://www.lunsfordracing.com/mm5/me...egory_Code=NEW 2 - 4mm x 65mm Titanium Turnbuckles (Front Camber) 2 - 4mm x 68mm Titanium Turnbuckles (Steering) 2 - 4mm x 70mm Titanium Turnbuckles-Long Thread (Rear Camber) Bearing sizes for the entire truck LOSA6907 5 x 8 x 2.5 Ball Bearing 4each Steering LOSA6947 5mmID x 11mmOD x 4mmW Sealed Ball Bearings 4 each Front and Rear Diff Pinions LOSA6954 5 x 10 x 4 Sealed Ball Bearings (clutch bearings for Ten-T) LOSA6956 12 x 18 x 4 Sealed Ball Bearings 6each F/R/C Diff outdrives LOSA6957 10 x 15 x 4 Sealed Ball Bearings Plastic Retainer 4ea Inner Hubs LOSA6958 6 x 12 x 4 Sealed Ball Bearings with Plastic Retainer 4ea outer Hubs Factory Parts Listing http://www.horizonhobby.com/Products/RelatedParts.aspx?ProdID=LOSB0127&Category=Parts%2 0Listing#prodDetailTabs[/URL] Parts Weight Losi stock battery tray: 2.8oz/79g Losi stock rear hubs: 7g Losi aluminum rear hubs: 10g Casey Pecks win at the Nitro Challenge- http://vimeo.com/20541530 http://www.globalownage.com/losi/wheels_body.pngSaladFork & SC Rage - http://www.youtube.com/watch?v=3lYe7T0S7To Blitz sized bodies fit with the least trimming. SC10 bodies fit but require more trimming. http://www.globalownage.com/losi/winning.pngPM me with any TLR SCTe win and I will post you here. http://www.globalownage.com/losi/issues.pngAnyone who has been reading the thread knows the diff pins on the first shipment of trucks have diff pins that are to soft for brushless power. Losi has updated the pins in the second shipment. If you suspect you have the older pins, contact Horizon Hobby (877) 504-0233, they will send you new pins free of charge. We don't need you to post about how pissed you are, we get it... It happened to all of us. http://www.globalownage.com/losi/hopups.pngDiff Pins The diff pins in the truck have been fixed in the seconds shipment of trucks. If you would like aftermarket pins, I suggest using Chrispins ([email protected]) or visit his forsale thread located here - http://www.rcshortcourse.com/forum/s...ad.php?t=18851 Diff pin length 24 mm long 3mm thick and the grove in the middle is 3mm long and 1.5mm deep Chassis droop screws Keep an eye on your chassis where your droop screws hit the stops. The small screws will chew down the chassis over time and cause premature wear. You can prevent this by installing 4-40 x 4mm Droop Screws (part#LOSA6253) http://www.horizonhobby.com/Products...rodID=LOSA6253 Servo Saver From the factory check your servo saver for tightness, we have seen this comes loose and causes steering issues. Red loctite seems to be the fix, blue loctite just doesn’t hold over time. OEM Hop-up Parts http://www.globalownage.com/losi/contact.pnghttp://www.horizonhobby.com/Products...prodDetailTabs Front/Rear Lightened Outdrives Part # LOSB3575 http://www.losi.com/Products/Feature...rodId=LOSB3575 http://www.losi.com/ProdInfo/LOS/250/LOSB3575-250.jpg Center Lightened Outdrives Part # LOSB3576 http://www.losi.com/Products/Feature...rodId=LOSB3576 http://www.losi.com/ProdInfo/LOS/250/LOSB3576-250.jpg Technical Questions: Questions about this product should be directed to Horizon Hobby's Product Support department. Horizon Hobby, Inc. ATTN: Product Support 4105 Fieldstone Road Champaign, IL 61822 Email: [email protected] Support Phone: (877) 504-0233 Fax: (217) 355-1552 |
It's about time!
Sure nice to see they went with a roller without electronics.
|
Can't wait to see some close up pics. I love my Ten-X and will see how it compares to the production truck.
|
I'm actually kind of supprised it wasn't realeased under the TLR banner, does look good though!
|
Originally Posted by Brian L
(Post 8516197)
Can't wait to see some close up pics. I love my Ten-X and will see how it compares to the production truck.
|
Looks good. I will like to see some more info about it though. Doesnt look to be what everyone thought it would be as it appears to be a different chassis/layout than the Eight Buggy. The Eight Buggy is bulletproof in my experience so maybe this will be too. Lets just hope its not made by the same guy who designed the Strike (out) :) .
|
Originally Posted by Fleshgearf150
(Post 8516225)
Looks good. I will like to see some more info about it though. Doesnt look to be what everyone thought it would be as it appears to be a different chassis/layout than the Eight Buggy. The Eight Buggy is bulletproof in my experience so maybe this will be too. Lets just hope its not made by the same guy who designed the Strike (out) :) .
|
Originally Posted by SaladFork
(Post 8516261)
It's pretty close to the 8ight, just a little smaller. And honestly it looks exactly how I thought it was going to be... A Ten T with SC wheels and SC body. :D
|
Originally Posted by Used Up Junk
(Post 8516204)
I'm actually kind of supprised it wasn't realeased under the TLR banner, does look good though!
Doens't look to bad though, pitty it wasn't a kit instead of prebuilt. |
Originally Posted by Drift_Buggy
(Post 8516285)
TLR is for racing though, this is only an SCT.
Doens't look to bad though, pitty it wasn't a kit instead of prebuilt. whoa whoa whoa...let's not start this argument... SCT ARE for racing just as much as a buggy is. |
TLR carries kits and rollers.
I wouldn't count it out just yet... |
Originally Posted by twigman08
(Post 8516294)
whoa whoa whoa...let's not start this argument...
SCT ARE for racing just as much as a buggy is. |
im guessing i might have to get rid of my hyper now :cry:
|
It should be TLR product for sure. SC's are not really bashers IMO especially with how huge the class is now. Ditch the 'race roller' release it as a kit and slap on some TLR logos. Save the "Losi" brand for RTR's
Looks like another home run for Losi. Just waiting on a TC and a 4wd buggy:nod: |
someone needs to do a shoot out between the hyper, jammin, and this thing. should be interesting
|
All times are GMT -7. It is currently 12:51 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.