Great I have them on my SC10FT already! Now I need an other tire for the stock SC10. I would like to have two different sets :)

I read many threads and for loose tracks M3 calibers, enduro SS and HB Megagrid are on the top of the list so if you already tried this tire I would be more than happy to have your feedback!

Proline gladiator must give massive traction looking at the thread, I'll take a look thanks

Also, I have three different motors to choose from: 10.5, 9.5 and 8.5. Do you have any preference for this track? I'm a smooth driver (clean lines)

Bowfighters look like they would hook up on that dirt. Also are you running any chassis weight on that truck? The rear looked very light and squirley.

As I said it's not me driving, neither my truck. It's a vid I found on youtube ;)

I have both a stock SC10 and a SC10 FT to set up for a race on that track and I've no idea where to begin :lol:

I will keep the subcultures I already have, ust need a second set of rear tires.

I have both stock tires and goose bumps for the front. Which ones would you choose?

Somethiing like an enduro or bowfighter. They have a bigger lug spaced out.

Shock Oil
 

Is there a table that shows the comparison, of Losi oil, to associated oil? Some fellows in the know seem to believe 27 1/2 Losi oil, is comparable to 30 wt. associated oil. Correct? Then would 32 1/2 losi oil be 35 wt. associated oil?
Thanks
The reason I ask, is because of those leaking a@% bottles.

Here it is:
http://www.twf8.ws/php/tip/shock.html

So looking at this site I changed the antisquat and went for 4 degrees on my stock SC10. I have the standard 3,5 degree setup on the SC10FT:

http://www.teamsc10.com/post/sc10-be...-rear-traction

I realize this is a long shot question but I just picked up the Avid front truck springs and was wondering if anybody else is using these. I have them on my buggy and they are great, but just curious if anyone has tried them.
http://i991.photobucket.com/albums/a...o/e46b5777.jpg

I am running the Whites on my T4.1 and love them.

anyone know where to get cheap sc10 2wd parts?

Check on ebay they have a lot of parts bundles on there for cheap. You can also upgrade to a lot of the FT parts for a cheaper price on ebay.

Looks pretty similar to my track. Gladiators are decent but AKA Cityblocks believe it or not have been the best we have found. Calibers are good and Bowties are probably a smidge better.

I would say Proline M3 Snipers or
AKA GridIron Soft

I personally have had no luck with calibers unless on a track that has very deep loose dirt

ty very much for this thread has told me alot about the sc10.
i am going to be running a 17.5 for stock, what motor would you guys recomend to race modified?
ty

SC10 gear diff oil
 

Hi all

What diff oil weight should I run in the gear diff.

Regards
Gary

Talk to your local mod hot-shoes and find out what they are running. I've been gravitating towards 8.5 turns for all my stuff. Brand is going to be pretty opinionated. I've been buying Vipers recently. Nice motors and they run super cool.