|
what is the RS missing that the FT kit has? Does it have any pros over the FT kit? If you were to buy one which would you choose and why?
If i were to get the RS i would be putting its electronics in my kids B4 and putting new electronics in the RS. I should add that i have the proline shock kit with adapters for sc10 that will go on the FT or RS |
can some one mesure the rear axle to the edge of the hex
|
.
|
Hey guys just picked up a sc10 roller and was looking for suggestions for motor/esc combos. Can anyone ppoint me in the right direction. I wanna run castle and was looking at the sidewinder sct or the 4600kv, 5700kv, what can anyone suggest
|
Originally Posted by specc
(Post 9341058)
what is the RS missing that the FT kit has? Does it have any pros over the FT kit? If you were to buy one which would you choose and why?
I went with the FT kit because I'm pretty serious about racing and would have eventually bought all the upgrades. Missing:
I should add that i have the proline shock kit with adapters for sc10 that will go on the FT or RS |
Originally Posted by EricJ
(Post 9342605)
No pros over the FT kit for racing, but it might be slightly more reliable when bashing.
I went with the FT kit because I'm pretty serious about racing and would have eventually bought all the upgrades. Missing:
For strength, or just because you have them? The V2 shocks are far better than the V1 shocks, so there's really no reason to replace them... |
I see alot of people with the RPM front bumper..does it have any advantages for the racers or just the basher??
|
Originally Posted by GMS_Racing
(Post 9343088)
I see alot of people with the RPM front bumper..does it have any advantages for the racers or just the basher??
|
!!!!ASSOCIATED SC10!!!!!!
JUST GOT MY SC FOR MY BDAY. I WAS SO EXITED I BUILT THE WHOLE THING IN ONE NIGHT(12-6:30AM). NOW I JUST NEED TO BUY ALL THE ELECTRONICS FOR IT. WHAT SIZE MOTORS ARE IN THE STOCK CLASS. I DIDNT WHAT TO JUMP STRAIGHT INTO THE MODDED CLASS.I'LL POST PICS WHEN I FIND MY CAMERA LOL:D:D:D
|
post your question here http://www.rctech.net/forum/electric...10-thread.html
|
Guess that announcement isnt really getting across to people! :lol:
|
Originally Posted by 20 SMOKE
(Post 9344311)
post your question here http://www.rctech.net/forum/electric...10-thread.html
Originally Posted by K-Line
(Post 9344327)
Guess that announcement isnt really getting across to people! :lol:
|
SC10 set up question
do the front tires have much effect on the set up even though they are not pulling or do you just set up using rear tires?
thanks |
yes the do affect on how it enters and exits,here is the sc10 thread http://www.rctech.net/forum/electric...10-thread.html
|
Ream arm mount toe
Can someone please explain rear arm mount toe and what the change would be from 2.0 to 4.0?
|
| All times are GMT -7. It is currently 02:12 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.