Yeah definitely can't wait to test it out this weekend!:D

I have it set so my slipper slips and not my diff. With all the reading I've been doing I have learned never to have my diff slip.....very very very BAD:lol:

If the diff is barking, does that mean it's too tight or too loose?

Too loose.

I thought I had a diff barking but it was a dry CVA. After I lubed it the barking was gone. Now I just have a gritty ball diff.

Change your balls! :lol:

:lol: GRITTY BALLZ.. :ha:

Or you can use this...

+ YouTube Video

......and the SC10 thread takes a turn for the worse :cry::weird:

:lol:

SC10 carpet jump track setup?
 

I run at an indoor carpet off raod track and am looking for tips on setup for my SC10, runing a mambamaxpro esc and a novak 17.5 brushless or Tekin redline 17.5 brushless. shock oil spring combo?ridehieghts? toe? and whatever you can help me with! :sneaky:

have any body try this and if is legal by roar

Pro-Line Front Inboard Hub Kit (SC10)
[PRO6068-00]

It's legal as long as you run the Proline Pro trak wheels to stay within the legal width. I don't know of any other wheels with the correct off set to be legal.

Might not have to though, rings wear before the balls do. If you change the rings before they get real bad you can get more life out of your balls, wait till it's real gritty and you'll have to do both.

I think they are trying to make the zero off-set wheel the new standard hex wheel for SC's. Pro-line SC10 kit, AE's SC4x4, and Losi SC 4x4 all use zero off-set wheels now. When DE Racing gets a wheel done I will be switching over to the Pro-Line kit. :cool:

AE jumped on board with that for the 4wd which is fine, and for 4wd it seems to be the case but I don't see AE ever changeing from the front axle/rear pin set-up they have now on the SC10. It would take an SC102 to make that happen. IMO

I'm still correct them because the 4x4 AE wheels aren't out yet and putting Lousy wheels on an SC10 just doesn't count:lol: