|
Originally Posted by F N CUDA
(Post 5925557)
Losi 1 or 2 degree hubs $7
Losi hinge pins $2 Total $9 Having Losi stuff on your AE...PRICELESS! Racer's Edge hubs $26 plus shipping New bigger bearings $? Total=a lot more $ Why not go Losi? |
Here ya go.
LOSA9807 1 deg hub LOSA9808 2 deg hub LOSA2164 1/8x1.250 hinge pins also needed 1/8 e-clips and not a bad idea to get LOSA9941 bearing spacers |
Originally Posted by trx450racer174
(Post 5925646)
Here ya go.
LOSA9807 1 deg hub LOSA9808 2 deg hub LOSA2164 1/8x1.250 hinge pins also needed 1/8 e-clips and not a bad idea to get LOSA9941 bearing spacers |
Originally Posted by RcRacing4Ever
(Post 5924419)
this is the RPM #70762 Front A arms...They told me Rpms rear A arms wont work...I did the losi upgrade with what u have listed..had to drill out the A arms to make the hings pin fit...hope that helps
|
Rear arms?
Originally Posted by mcdonaldsracing
(Post 5926650)
I'm running RPM GT2 front and rear arms on mine and they work just fine. I'm also using the 1.5 degree(I believe) GT2 hubs and it all fits together just fine:)
|
you have to use the gt2 hubs with the gt2 arms to get the width right.and then they will bolt right on.another local guy here in omaha runs the rear gt2arms and hubs.the arms are shorter then stock,and the gt2 hubs are wider then stock.thats why you most run both.
|
maybe i could get your guys advice on this charger
http://www.hobbypartz.com/thac6smbachw.html who has one pro's and cons or is like you get what you pay for.. I'm just gonna use it to charge my lipo for my sc10.. |
Originally Posted by tedstryker
(Post 5928053)
maybe i could get your guys advice on this charger
http://www.hobbypartz.com/thac6smbachw.html who has one pro's and cons or is like you get what you pay for.. I'm just gonna use it to charge my lipo for my sc10.. |
Arms
Originally Posted by dgdcustoms
(Post 5927965)
you have to use the gt2 hubs with the gt2 arms to get the width right.and then they will bolt right on.another local guy here in omaha runs the rear gt2arms and hubs.the arms are shorter then stock,and the gt2 hubs are wider then stock.thats why you most run both.
|
Originally Posted by RcRacing4Ever
(Post 5924419)
this is the RPM #70762 Front A arms...They told me Rpms rear A arms wont work...I did the losi upgrade with what u have listed..had to drill out the A arms to make the hings pin fit...hope that helps
does anyone know if gt2 front arms change the track??? using stock hubs etc |
Originally Posted by rapster402
(Post 5928918)
are you running GT2 rear arms? with the losi hubs?? does it work, i think i read the track will be too narrow...
does anyone know if gt2 front arms change the track??? using stock hubs etc |
Originally Posted by mhodgie
(Post 5928671)
Doesn't look too bad. I haven't used one but love my Onyx 230!
|
Originally Posted by R40Victim
(Post 5930256)
But it's only a 50 watt charger, so if he got bigger batteries later, he couldn't charge them at 1C
The biggest batt I have is the Checkpoint 4900 but have been racing the Duratrax 3700 for some and only reached cut-out once while practicing. |
Originally Posted by mhodgie
(Post 5930321)
Right, he can only charge up to 5a but there was no mention as to what type of batt he was looking at. All in all the specs and price don't look too bad as I said.
The biggest batt I have is the Checkpoint 4900 but have been racing the Duratrax 3700 for some and only reached cut-out once while practicing. |
Originally Posted by R40Victim
(Post 5930877)
I meant like 3, 4, or 5S. Looks like he's all 10th scale, so he should be fine.
|
| All times are GMT -7. It is currently 03:58 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.