Schumacher Corner
07-09-2005, 03:54 AM
Originally Posted by MattW
The 2.5 adjustable chassis was never available for sale.
They can also make the chassis in any thickness you require
07-09-2005, 07:09 AM
Originally Posted by xxxkat
On the gear ratio's how can you tell what ratio you are running..The pulley 20 or 17?? What is the "stock" ratio,2.12 or 1.8..
.-WR
07-09-2005, 08:33 AM
Tech Master
iTrader: (9)
Originally Posted by AdrianM
We have three projects that must be completed before any work can begin on a new sedan.
1. Havoc - Monster/Stunt Truck - .28 engine, 3 speed, super burly suspension w/70mm travel per corner. Sept/Oct 05.
2. Cat 4000 - 4wd Electric Racing Buggy - Mid/rear motor, saddle pack chassis, new hubs/arms, new drive train (not Mi2 style). Dec 05.
3. Top Secret Nitro Truck. Dec 05
you can buy an Mi2 with confidence now as the Mi2 is really flying right now in the US and Europe.
PW Won the 2004 ROAR Nats in 19T and we had 2 cars in the Mod Mains (6th and 9th). If he hadn't gotten hit and broken in the first round PW would have been top 5 in the invite class at the Reedy Race (He ended up 11th). Every time they were in the same race Rheinart (the current WC) could not pass PW.
Teemu is on the Podium in just about every race he has entered this year and recently won the Nordic champs turning faster lap times than Rheinart and Groskamp.
If you always wait for a new car you will never buy one. The day after a new car gets signed off for production work begins on its replacement. There will be a new sedan but if you wait you will be missing out on a lot of good times with an Mi2.
1. Havoc - Monster/Stunt Truck - .28 engine, 3 speed, super burly suspension w/70mm travel per corner. Sept/Oct 05.
2. Cat 4000 - 4wd Electric Racing Buggy - Mid/rear motor, saddle pack chassis, new hubs/arms, new drive train (not Mi2 style). Dec 05.
3. Top Secret Nitro Truck. Dec 05
you can buy an Mi2 with confidence now as the Mi2 is really flying right now in the US and Europe.
PW Won the 2004 ROAR Nats in 19T and we had 2 cars in the Mod Mains (6th and 9th). If he hadn't gotten hit and broken in the first round PW would have been top 5 in the invite class at the Reedy Race (He ended up 11th). Every time they were in the same race Rheinart (the current WC) could not pass PW.
Teemu is on the Podium in just about every race he has entered this year and recently won the Nordic champs turning faster lap times than Rheinart and Groskamp.
If you always wait for a new car you will never buy one. The day after a new car gets signed off for production work begins on its replacement. There will be a new sedan but if you wait you will be missing out on a lot of good times with an Mi2.
07-09-2005, 08:59 AM
Will the Losi race still happen 
I hear Minnreg the club is all but finished...Lets hope they can keep something going 
I hear Minnreg the club is all but finished...Lets hope they can keep something going
07-09-2005, 10:23 AM
PW- Look for some results from this weekend's action somewhere on the net tomorrow. It's been well hyped up and we plan on having a ton of fun.
07-09-2005, 11:25 AM
"plan on having a ton of fun" is STLNLST code for "I know I'm going to get my but kicked". 
07-09-2005, 04:50 PM
Has anyone tried the ackerman link in the outer holes on the steering bellcranks?
I've noticed that in all the setups I've downloaded, everyone is using the middle hole.
I've noticed that in all the setups I've downloaded, everyone is using the middle hole.
07-09-2005, 05:04 PM
BMI chasis
BTW. I'm still waiting to here what you guys think about the production BMI chassis. I'm thinking a new chassis will soon be in order but dont know if I should go for the BMI or another TMU chasis. How are the production BMI chassis different from the ones that PW and the others drive?
07-09-2005, 05:17 PM
Originally Posted by IslandBwoy
BTW. I'm still waiting to here what you guys think about the production BMI chassis. I'm thinking a new chassis will soon be in order but dont know if I should go for the BMI or another TMU chasis. How are the production BMI chassis different from the ones that PW and the others drive?
I use the outer holes (the troy schafer holes :-)) and i like it a lot.
07-09-2005, 10:06 PM
how much does the bmi chassis cost in aus dollars
07-09-2005, 11:30 PM
I just got home from a pretty productive night at SoCal. The car was better than it has ever been and I ran a SPOOL (Just for you Clint ) I was on 12 run old Sorex 36r's because my Tire order didn't come in this week and I was only .1 sec off fast lap in Pro Mod. I was quite pleased. I had some kind of motor or ESC trouble in the main. I'll need to pull it apart tomorrow to figure out what happened. But over all a very productive day.
Donny- I'll send you this setup I ran so you can try it if we go up there again in a couple weeks. It was very good.
) I was on 12 run old Sorex 36r's because my Tire order didn't come in this week and I was only .1 sec off fast lap in Pro Mod. I was quite pleased. I had some kind of motor or ESC trouble in the main. I'll need to pull it apart tomorrow to figure out what happened. But over all a very productive day. Donny- I'll send you this setup I ran so you can try it if we go up there again in a couple weeks. It was very good.
Last edited by Jon Kerr; 07-10-2005 at 03:24 PM.
07-09-2005, 11:55 PM
07-10-2005, 08:49 AM
Originally Posted by rbboy
07-10-2005, 12:23 PM
Congrats to Jason Moberly and Clint Riley for their strong performance at this years 7th Annual 2005 REVO Race 
results: http://www.riponspeedway.com/RaceRes...E9.txt&ID=1873
results: http://www.riponspeedway.com/RaceRes...E9.txt&ID=1873
07-10-2005, 02:49 PM
Thanks. The car was great. Basically running the same setup from the Reedy Race. Even the RP30's that I ran at the Reedy. Gotta love those days when you car works the first time you put it on the track and you don't have to wrench all night long.
Gotta love those days when you car works the first time you put it on the track and you don't have to wrench all night long.