68LikesTamiya TA05 Touring Sedan
04-18-2007, 12:39 PM
#7171
Tech Regular
Originally Posted by Hebiki
i just realized.....
the_informant = trf_racer
he had to get another screenname because he was just DYING to post pictures and he didnt want the Tamiya ninjas coming to his house to "off" him for posting the secret photos.
the_informant = trf_racer
he had to get another screenname because he was just DYING to post pictures and he didnt want the Tamiya ninjas coming to his house to "off" him for posting the secret photos.
I didn't come up with those coloured pictures
Anyways, the IFS looks neat! It looks like it comes with LW Suspension.
BTW, the upper deck of the TA05MS is higher than the TRF415MSX/MSXX, as the bulkheads are the same as the Porsche, therefore, it is a Porsche, with standard wheelbase.
04-18-2007, 12:46 PM
#7173
Tech Regular
TA05MS will be released in July. 
04-18-2007, 12:53 PM
#7174
Tech Adept
the only reason i got a ta05 is cuz i could join the gt1 and gt2 races for tamiya. if the ta05 comes out with the double deck cf chassis then it wouldnt be allowed for gt2 class? then why not just buy the msx and leave it?
well i jsut spent 350 usd and bought a fully hopped up ta05 from a shop owner. it has more hopups than the ta05r. he gave me almost every single hopup available.
well i jsut spent 350 usd and bought a fully hopped up ta05 from a shop owner. it has more hopups than the ta05r. he gave me almost every single hopup available.
04-18-2007, 01:26 PM
#7176
If this is any help to anyone, here is the screws you need to replace the Phillips on a TA05-R...
29x M3×8mm Round Head
8x M3×10mm Round Head
1x M3×12mm Round Head
19x M3×8mm Flat Head
14x M3×10mm Flat Head
6x M3×12mm Flat Head
1x M3×23mm Flat Head
Also on my blog - http://www.sosidge.com/2007/04/18/he...tamiya-ta05-r/
29x M3×8mm Round Head
8x M3×10mm Round Head
1x M3×12mm Round Head
19x M3×8mm Flat Head
14x M3×10mm Flat Head
6x M3×12mm Flat Head
1x M3×23mm Flat Head
Also on my blog - http://www.sosidge.com/2007/04/18/he...tamiya-ta05-r/
04-18-2007, 01:31 PM
#7177
Originally Posted by sosidge
If this is any help to anyone, here is the screws you need to replace the Phillips on a TA05-R...
29x M3×8mm Round Head
8x M3×10mm Round Head
1x M3×12mm Round Head
19x M3×8mm Flat Head
14x M3×10mm Flat Head
6x M3×12mm Flat Head
1x M3×23mm Flat Head
29x M3×8mm Round Head
8x M3×10mm Round Head
1x M3×12mm Round Head
19x M3×8mm Flat Head
14x M3×10mm Flat Head
6x M3×12mm Flat Head
1x M3×23mm Flat Head
04-18-2007, 01:57 PM
#7178
Originally Posted by JayBee
And you know this....man 
I've always wondered what the 05 would be like with a DD CF Chassis.
You're just as much of a whore as I am
I've always wondered what the 05 would be like with a DD CF Chassis.You're just as much of a whore as I am
04-18-2007, 03:22 PM
#7181
Tech Regular
Originally Posted by or8ital
Is that second one a special purpose car for drifting or something? Whats up with those front shocks?
That car has a very low nose.
04-18-2007, 03:29 PM
#7182
Originally Posted by JayBee
And you know this....man I've always wondered what the 05 would be like with a DD CF Chassis.
You're just as much of a whore as I am
I've always wondered what the 05 would be like with a DD CF Chassis.You're just as much of a whore as I am
Originally Posted by DOTMAN
Ya Know, Chris. Chassis Whore isn't accurate. Chassis Slut is more appropriate. Whores do it for money. Sluts do it cause they like it.
either way... i need to find a way to add this car to my stable. now i can run GT1 with a car i know pretty well. 
-----------------------
trf_racer.. its okay. we ALL KNOW NOW that you're really "the_informant"... your secret is safe with us.
wait... what? anyone can access this site and read it?
DOH! watch for those Tamiya Ninjas.
04-18-2007, 04:16 PM
#7184
Tech Regular
Originally Posted by over gear
anyone got a pic of this?
53990 TA05 Aluminum Bulkhead
53990 TA05 Aluminum Bulkhead